Entry And Start System Entry Functions Do Not Operate At All

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Door Lock. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK KEY CANCEL FUNCTION

CHECK WIRE HARNESS (CERTIFICATION ECU - BATTERY AND BODY GROUND)

ENTRY AND START SYSTEM - Entry Functions do not Operate at All


DESCRIPTION

When the entry functions do not operate at all, it is possible that the certification ECU is malfunctioning or that the wire harness leading to the certification ECU is short circuited.

WIRING DIAGRAM


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Door Lock.Power Door Lock Control System.Entry And Start System Entry Functions Do Not Operate At All


INSPECTION PROCEDURE

1.CHECK KEY CANCEL FUNCTION

  1. Check that the key cancel function has been set (RAV4_ACA30 RM000001VGI003X.html).

    OK:
    Key cancel function is set.


OK
END (UNSET KEY CANCEL FUNCTION)
NG


2.CHECK WIRE HARNESS (CERTIFICATION ECU - BATTERY AND BODY GROUND)
Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Door Lock.Power Door Lock Control System.Entry And Start System Entry Functions Do Not Operate At All

  1. Disconnect the E63 ECU connector.

  1. Measure the resistance and voltage of the wire harness side connectors.

    Standard resistance:
    Tester Connection
    		Specified Condition
    E63-17 (E) - Body ground
    		Below 1 Ω
    Standard voltage:
    Tester Connection
    		Condition
    		Specified Condition
    E63-18 (IG) - Body ground
    		Ignition switch on (IG)
    		10 to 14 V
    Ignition switch off
    		Below 1 V
    E63-1 (+B1) - Body ground
    		Always
    		10 to 14 V


NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK

REPLACE ECU AGGREGATION BOX (CERTIFICATION ECU)