4Wd Control Ecu Removal

Drive Line. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Gf1A Transfer. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

  3. REMOVE LOWER INSTRUMENT FINISH PANEL (for RHD)

  4. REMOVE 4WD CONTROL ECU

4Wd Control Ecu -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Gf1A Transfer.Transfer System.4Wd Control Ecu Removal

  1. Open the glove compartment door.

  1. Detach the claw from the glove compartment door stopper.

  1. While pushing in the sides of the glove compartment door in the direction indicated by the arrows in the illustration, open the door to release it from the 2 stoppers.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Open the door as much as possible.

  1. Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.



3. REMOVE LOWER INSTRUMENT FINISH PANEL (for RHD)


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the 2 screws.

  1. Using a screwdriver, detach the 8 claws and remove the lower instrument panel finish panel.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE 4WD CONTROL ECU


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Disconnect the connector.

  1. Remove the bolt and ECU.