Transmission Control Cable Installation

Install the control cable with the 2 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the control cable to the control cable bracket, and install 2 new clips.

Connect the control cable to the transaxle, and install the 2 washers and 2 clips.

Connect the ends of the control cable and install the 2 clips to the shift lever.

Turn the lock nuts of the shift cable 270° counterclockwise, and hold them in that position. Install the shift cable and select cable while holding the lock nuts.

Check that the cables are installed securely.

Push in the cable locks of the shift cable and select cable.

Connect the cable ends of the control cable and install the 2 clips.

Connect the connector.

Install the rear console box with the 2 bolts and attach the wire harness clamp.

Install the 2 screws.

Attach the 6 claws to install the console rear end panel.

Connect the connectors.

Attach the 4 clips to install the upper rear console panel.

Attach the 2 clips to install the cup holder box.

Install the 2 screws.

Connect the connectors.

Attach the 2 clips and 2 claws to install the switch base.

Attach the 2 clips and 4 claws to install the upper console panel.

for Manual Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.

for Automatic Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.

Attach the 4 clips to install the upper panel garnish.

Attach the 4 clips to install the upper panel garnish.