Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Door Lock. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Wireless Door Lock Control System (W/O Entry And Start System) -- System Description |
| WIRELESS DOOR CONTROL SYSTEM DESCRIPTION |
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
- The door control receiver performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU.
- A key-integrated type transmitter is used and it contains the following 2 switches: the door lock switch and door unlock switch.
- An LED is built into the transmitter so that the battery status can be checked.
- The door control receiver performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU.
| FUNCTION OF MAIN COMPONENTS |
| Components | Functions |
| Door control transmitter |
|
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data |
| Door lock (door lock position switch) | Transmits door lock conditions of each door to main body ECU |
| Unlock warning switch | Detects if key is in ignition key cylinder |
| Front door courtesy light switch Rear door courtesy light switch Back door courtesy light switch | Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
| SYSTEM FUNCTION |
Door lock / unlock function:
- With no key in the ignition key cylinder (unlock warning switch is OFF) and all door courtesy light switches OFF, pressing the door control transmitter's LOCK / UNLOCK switch causes the transmitter to output faint electric waves. The transmitter sends a faint electrical wave to the door control receiver. The high frequency circuit built into the door control receiver demodulates the wave into code data, computes the data, and compares the data with previously registered ID codes. If the data is verified, a door lock / unlock request signal is output to the main body ECU. When the request signal is received, the main body ECU outputs a door lock / unlock control signal to each door lock. Each door lock then locks / unlocks its respective door and turns ON / OFF its door lock position switch in accordance with the signal.
- With no key in the ignition key cylinder (unlock warning switch is OFF) and all door courtesy light switches OFF, pressing the door control transmitter's LOCK / UNLOCK switch causes the transmitter to output faint electric waves. The transmitter sends a faint electrical wave to the door control receiver. The high frequency circuit built into the door control receiver demodulates the wave into code data, computes the data, and compares the data with previously registered ID codes. If the data is verified, a door lock / unlock request signal is output to the main body ECU. When the request signal is received, the main body ECU outputs a door lock / unlock control signal to each door lock. Each door lock then locks / unlocks its respective door and turns ON / OFF its door lock position switch in accordance with the signal.
Answer-back function:
- The main body ECU receives the door unlock detection switch's ON / OFF signals and uses these signals to confirm if the door control operation has been completed. The main body ECU then outputs the hazard warning light control signals to flash the hazard warning lights as an answer-back indication.
- The main body ECU receives the door unlock detection switch's ON / OFF signals and uses these signals to confirm if the door control operation has been completed. The main body ECU then outputs the hazard warning light control signals to flash the hazard warning lights as an answer-back indication.
The wireless door lock control system has the following functions.
Function Outline All door lock function Pressing LOCK switch locks all doors All door unlock function Pressing UNLOCK switch unlocks all doors Answer-back function Hazard warning lights flash once when doors are locked, and flash twice when doors are unlocked to indicate that operation has been completed Automatic locking function If no doors are opened within 30 seconds after being unlocked by wireless transmitter, all doors are locked again automatically Illuminated entry function If locked doors are unlocked through wireless operation, ignition key cylinder light and room No. 1 light illuminate. If one of following situations occurs, lights fade out: - Within 15 seconds, doors are not opened and doors are locked through wireless operation
- Within 15 seconds, key is inserted into ignition key cylinder and ignition switch is turned on (IG)
- No operations or actions are performed within 15 seconds
Security function Sends signal as rolling code Transmitter recognition code registration function Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, built into door control receiver - Within 15 seconds, doors are not opened and doors are locked through wireless operation