Wireless Door Lock Control System (W/O Entry And Start System) How To Proceed With Troubleshooting

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Door Lock. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. PROBLEM SYMPTOMS TABLE

  4. OVERALL ANALYSIS AND TROUBLESHOOTING*

  5. REPAIR OR REPLACE

  6. CONFIRMATION TEST

Wireless Door Lock Control System (W/O Entry And Start System) -- How To Proceed With Troubleshooting


HINT:
  1. The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock system is operating normally. Check the power door lock system first before troubleshooting the wireless door lock control system (RAV4_ACA30 RM000001W76001X.html).
  2. Use these procedures to troubleshoot the wireless door lock control system.
  3. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE

      Result:
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation Check (RAV4_ACA30 RM000001VZA003X.html)

    2. Data List / Active Test (RAV4_ACA30 RM000001VSD001X.html)

    3. Terminals of ECU (RAV4_ACA30 RM000001VS6001X.html)


    NEXT


    5.REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END