Floor Shift Assembly Installation

Connect the 2 connectors and attach the clamp.

Install the floor shift with the 4 bolts.

Turn the nut of the control cable and push in the lock.

Install the control cable onto the shift lever retainer.

NOTICE:

1. Install the cable with the protruding portion of the cable outer facing upward.
   


2. After installing, check that the lock of the cable outer is protruding beyond portion A-A, as shown in the illustration.
   

Connect the control cable to the shift lever.

NOTICE:

Connect the control cable so that the adjusting mechanism lock of the control cable is installed on the driver side of the vehicle.

When shifting the lever from P to the R position with the ignition switch on (IG) and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.

Start the engine and make sure that the vehicle moves forward when shifting the lever from N to the D position and moves rearward when shifting the lever to the R position.
If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.

Shift the shift lever to the N position

Slide the adjuster case cover in the direction shown in the illustration and pull out the lock piece.

Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

Press the lock piece into the adjuster case and lock it.

Slide the cover in the direction shown in the illustration.

NOTICE:

Slide the cover past the protrusion of the lock piece.

Inspect the operation after the adjustment.

Install the rear console box (RAV4_ACA30 RM000001RHG00HX.html).