Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) Removal

Cruise Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Cruise Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE STEERING PAD ASSEMBLY

  3. REMOVE CRUISE CONTROL MAIN SWITCH

Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) -- Removal


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (RAV4_ACA30 RM000000XFD06JX.html).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE STEERING PAD ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Cruise Control.Cruise Control System.Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) Removal

  1. Straighten the front wheels.

  1. Using a T30 "torx" driver, loosen the 2 screws until the groove along each screw circumference catches on the screw case.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Cruise Control.Cruise Control System.Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) Removal

  1. Pull out the steering pad from the steering wheel and support the steering pad with one hand as shown in the illustration.

    NOTICE:
    When removing the steering pad, do not pull the airbag wire harness.

  1. Using a screwdriver, disconnect the 2 airbag connectors.

    CAUTION:
    When handling the airbag connector, do not damage the airbag wire harness.

  1. Disconnect the horn connector and remove the steering pad.



3. REMOVE CRUISE CONTROL MAIN SWITCH


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Cruise Control.Cruise Control System.Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) Removal

  1. Disconnect the connector.

  1. Remove the 2 screws and switch.