Cruise Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Cruise Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Cruise Control Main Switch (For 1Az-Fe, 2Az-Fe) -- Installation |
| 1. INSTALL CRUISE CONTROL MAIN SWITCH |
 |
Install the switch with the 2 screws.
- Torque:
- 1.7 to 3.0 N*m{17.34 to 30.60 kgf*cm, 15.04 to 26.55 in.*lbf}
Connect the connector.
| 2. INSTALL STEERING PAD ASSEMBLY |
Support the steering pad with one hand as shown in the illustration.
 |
Connect the 2 airbag connectors.
- NOTICE:
- When handling the airbag connector, do not damage the airbag wire harness.
Connect the horn connector.
Install the steering pad after confirming that the circumference grooves of the screws are caught on the screw case.
Using a T30 "torx" driver, install the 2 screws.
- Torque:
- 8.8 N*m{90 kgf*cm, 78 in.*lbf}
 |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. CHECK SRS WARNING LIGHT |
Check the SRS warning light (RAV4_ACA30 RM000000XFD06JX.html).