Brake Master Cylinder (For Lhd) Removal

Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 1AZ-FE)

  2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 2AZ-FE)

  3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 3ZR-FAE)

  4. DRAIN BRAKE FLUID

  5. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Brake Master Cylinder (For Lhd) -- Removal


NOTICE:
  1. The master cylinder and piston are designed so that the piston can easily fall out. Prevent this by making sure to tip of the master cylinder points downward when handling the master cylinder.
  2. Make sure foreign matter does not attach to the master cylinder's piston. If foreign matter attaches, clean it off with a cloth. Then apply lithium soap base glycol grease to the entire outer circumference contact surface area of the piston.


1. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 1AZ-FE)

  1. Remove the air cleaner case (RAV4_ACA30 RM000001BC300NX.html).



2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 2AZ-FE)

  1. Remove the air cleaner case (RAV4_ACA30 RM000001BC300OX.html).



3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 3ZR-FAE)

  1. Remove the air cleaner case (RAV4_ACA30 RM000003PXM003X.html).



4. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


5. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake.Brake System.Brake Master Cylinder (For Lhd) Removal

  1. Release the vacuum pressure in the brake booster as follows.

    1. Stop the engine.

    2. Depress the brake pedal several times.

  1. for Manual Transaxle:
    Disconnect the clutch reservoir tube labeled A from the master cylinder.

  1. Disconnect the brake fluid level warning switch connector labeled B.

  1. Using a union nut wrench, disconnect the 2 brake lines labeled C from the master cylinder.

  1. Remove the 2 nuts.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Pull out the master cylinder from the brake booster.

    NOTICE:
    1. The master cylinder and piston are designed so that the piston can easily fall out. Prevent this by making sure to tip of the master cylinder points downward when handling the master cylinder.
    2. Make sure foreign matter does not attach to the master cylinder's piston. If foreign matter attaches, clean it off with a cloth. Then apply lithium soap base glycol grease to the entire outer circumference contact surface area of the piston.

  1. Remove the O-ring from the master cylinder.