Map Light Assembly Removal

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE MAP LIGHT ASSEMBLY

  3. REMOVE MAP LIGHT LENS

Map Light Assembly -- Removal




1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
w/ Navigation System for HDD:
After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.


2. REMOVE MAP LIGHT ASSEMBLY


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Detach the 4 clips and remove the map light.

  1. Disconnect the light connector.



3. REMOVE MAP LIGHT LENS


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Using a screwdriver, pry out the 8 claws and remove the map light lens.

    HINT:
    Tape the screwdriver tip before use.