Cruise Control System -- Precaution |
1.IGNITION SWITCH EXPRESSIONS |
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Expression Switch Type Ignition Switch (Position) Engine Switch (Condition) Ignition Switch off LOCK Off Ignition Switch on (IG) ON On (IG) Ignition Switch on (ACC) ACC On (ACC) Engine Start START Start
2.PRECAUTIONS WHEN USING INTELLIGENT TESTER |
When using the intelligent tester to troubleshoot the entry and start system: Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned on (IG).
3.HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM |
Turn the cruise control main switch OFF when not using the cruise control system.
Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
The RESUME/ACCEL operation changes according to the cruise control system status. When the cruise control system is operating, ACCEL operates. When the cruise control system is not operating, RESUME operates.
When the cruise control system is operating and the CRUISE main indicator light blinks, turn the cruise control main switch OFF to reset the cruise control system. After the reset, if the cruise control main switch cannot be turned ON, or the cruise control system is canceled immediately after turning the cruise control main switch ON, the system may have a malfunction.
Do not use the cruise control system where the road conditions are as follows:
- Heavy traffic
- Steep downhill
- Roads with sharp turns
- Icy or snowy roads
- Slippery roads
- Heavy traffic