Dtc 58-43 Spd Signal Error

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Navigation. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

INSPECTION PROCEDURE

CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

DTC 58-43 SPD Signal Error

DTC 80-43 SPD Signal Error


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
58-43
A difference between the GPS speed and SPD pulse is detected.
  1. Speed signal circuit
  2. Navigation receiver assembly
80-43
A difference between the GPS speed and SPD pulse is detected.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (RAV4_ACA30 RM0000011BU05HX.html).
1.CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Enter the "Navigation Check" mode and select "Vehicle Sensors" (RAV4_ACA30 RM000003A3N00LX.html).

  1. While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

    OK:
    The readings are equal or almost equal.


NG
GO TO "Speed Signal Circuit" (RAV4_ACA30 RM000002NNE038X.html)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (RAV4_ACA30 RM000003P8D001X.html)