Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Gr-Fe Engine Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Ecm -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector.
![]() |
Disconnect the VSV (air intake control) connector.
Disconnect the 2 wire harness clamps and 2 vacuum hoses.
Disconnect the No. 2 ventilation hose from the air cleaner hose.
Loosen the No. 1 air cleaner hose clamp.
Unfasten the 2 hook clamps, and then remove the air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
3. REMOVE AIR CLEANER CASE |
Disconnect the harness clamp.
Remove the 3 bolts and air cleaner case.
![]() |
4. REMOVE ECM |
Remove the 3 bolts of the ECM bracket.
![]() |
Disconnect the 2 ECM connectors.
- NOTICE:
- After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.
Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.
![]() |
Remove the ECM with bracket.
Remove the 4 screws and 2 ECM brackets.
![]() |