Fuel Pressure Regulator Installation

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
1Az-Fe Fuel. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

  2. INSTALL FUEL PUMP ASSEMBLY

  3. INSTALL NO. 1 FUEL SUCTION SUPPORT

  4. INSTALL NO. 1 FUEL SUB-TANK

  5. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY

  6. INSTALL FUEL TANK VENT TUBE SET PLATE

  7. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

  8. CONNECT FUEL EMISSION HOSE

  9. INSTALL FUEL TANK ASSEMBLY

Fuel Pressure Regulator -- Installation



1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Apply a light coat of gasoline to 2 new O-rings and install them onto the fuel pressure regulator.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Install the fuel pressure regulator to the fuel filter.



2. INSTALL FUEL PUMP ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Connect the fuel pump connector.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Install the fuel pump spacer to the fuel pump assembly.

  1. Apply gasoline to a new O-ring and install the O-ring to the fuel pump.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Attach the 5 claws to the holes to install the fuel pump.



3. INSTALL NO. 1 FUEL SUCTION SUPPORT


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Attach the 2 claws to the holes to install the No. 1 fuel suction support.



4. INSTALL NO. 1 FUEL SUB-TANK


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Attach the 2 claws to the holes and install the No. 1 fuel sub-tank.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Connect the wire harness.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Install the 2 springs to the fuel suction plate shafts, and then install them to the No. 1 fuel sub-tank.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Using needle-nose pliers, install a new E-ring.

    HINT:
    Slightly lower the fuel suction plate to install the E-ring.


5. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Install a new gasket onto the fuel suction with pump.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Connect the fuel hose with the paint mark facing towards the top of the vehicle, and then secure the clip.

  1. Install the fuel suction with pump into the fuel tank.

    NOTICE:
    Do not damage the fuel suction with pump.


6. INSTALL FUEL TANK VENT TUBE SET PLATE


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Install the set plate with the 8 bolts.

    Torque:
    4.0 N*m{41 kgf*cm, 35 in.*lbf}


7. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
  1. Install the fuel tube with the joint clip.

    NOTICE:
    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
    1. Check that there are no scratches or foreign objects on the connecting parts.
    2. Check that the fuel tube joint is inserted securely.
    3. Check that the fuel tube joint clip is on the collar of the fuel tube joint.
    4. After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.
    5. Be careful not to damage the clip. If the clip is damaged, replace it.


8. CONNECT FUEL EMISSION HOSE


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Fuel.Fuel System.Fuel Pressure Regulator  Installation
  1. Connect the purge line hose, air inlet line hose to the fuel suction plate.

  1. Connect the fuel emission hose to the fuel suction plate.

    HINT:
    Firmly push the tube connector until a "click" sound is heard.
    NOTICE:
    1. Before connecting the hose, check if there is any damage or foreign matter in the hose or connector.
    2. Check that the connector is connected by pulling on it.


9. INSTALL FUEL TANK ASSEMBLY
  1. Install the fuel tank assembly (RAV4_ACA30 RM000000YLR03DX.html).