Shift Lever Assembly Installation
INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY
CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY
INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
INSTALL CONSOLE REAR END PANEL
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
INSTALL CONSOLE CUP HOLDER BOX
INSTALL SWITCH BASE
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH
INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Shift Lever Assembly -- Installation |
| 1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY |
Install the shift lever with the 4 bolts.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
Install the 4 wire harness clamps.
| 2. CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY |
Connect the ends of the control cable and install the 2 clips to the shift lever.
Turn the lock nuts of the shift cable 270° counterclockwise, and hold them in that position.
Install the shift cable and select cable while holding the lock nuts.
Check that the cables are installed securely.
Push in the cable locks of the shift cable and select cable.
| 3. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY |
Connect the connector.
Install the rear console box with the 2 bolts and attach the wire harness clamp.
Install the 2 screws.
| 4. INSTALL CONSOLE REAR END PANEL |
Attach the 6 claws to install the console rear end panel.
| 5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
Connect the connectors.
Attach the 4 clips to install the upper rear console panel.
| 6. INSTALL CONSOLE CUP HOLDER BOX |
Attach the 2 clips to install the cup holder box.
Install the 2 screws.
Connect the connectors.
Attach the 2 clips and 2 claws to install the switch base.
| 8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 2 clips and 4 claws to install the upper console panel.
| 9. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH |
Attach the 4 clips to install the upper panel garnish.
| 10. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH |
Attach the 4 clips to install the upper panel garnish.
| 11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
for Manual Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.
for Automatic Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.
| 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
