Hazard Warning Switch Removal

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER

  3. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

Hazard Warning Switch -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
w/ Navigation System for HDD:
After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.


2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.

  1. Disconnect the connector.



3. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Detach the 2 claws and remove the switch.