Automatic Transaxle System Manual Shifting Test

Transmission. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
U241E Automatic Transaxle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. MANUAL SHIFTING TEST

Automatic Transaxle System -- Manual Shifting Test



MANUAL SHIFTING TEST
The purpose of this manual shifting test is to determine whether a problem is caused by either mechanical or electrical factors. Disconnecting the transmission wire disables electrically-controlled automatic gear shifting. In this case, operating the shift lever is the only way to shift the transaxle gear. If the gear is not changed by shift lever operation, it is assumed that there is a mechanical problem.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Turn the ignition switch off.

  2. Disconnect the transmission wire connector.

  3. Warm up the engine.

  4. Drive the vehicle.

  5. Check the transaxle operation when the shift lever is moved into L, 2, 3 and D positions.

    Standard:
    Shift Lever
    		Operation
    L to 2
    		No shift (Not change)
    2 to 3
    		No shift (Not change)
    3 to D
    		No shift (Not change)
    D to 3
    		No shift (Not change)
    3 to 2
    		No shift (Not change)
    2 to L
    		No shift (Not change)

  6. Turn the ignition switch off.

  7. Connect the transmission wire connector.

  8. Clear DTCs (RAV4_ACA30 RM000000W770C0X.html).

HINT:
When the transmission wire is disconnected, the transaxle gear will be set as listed below.
Shift Lever
Gear
P
Parking
R
Reverse
N
Neutral
D
3rd
3
3rd
2
3rd
L
3rd