K111F Cvt. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
INSPECT TRANSMISSION REVOLUTION SENSOR (NIN)
INSPECT TRANSMISSION REVOLUTION SENSOR (NT)
INSPECT TRANSMISSION REVOLUTION SENSOR (NOUT)
Speed Sensor -- Inspection |
| 1. INSPECT TRANSMISSION REVOLUTION SENSOR (NIN) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
1 (NIN-) - 2 (NIN+)
| 20°C (68°F)
| 560 to 680 Ω
|
Text in Illustration*1
| Component without harness connected
(Transmission Revolution Sensor (NIN))
|
If the result is not as specified, replace the transmission revolution sensor (NIN).
| 2. INSPECT TRANSMISSION REVOLUTION SENSOR (NT) |
Connect the battery to the sensor as shown in the illustration.
Wave a magnetic object left and right in front of the tip of the transmission revolution sensor (5 mm (0.197 in.) gap or closer) to change the high/low signals while measuring the current.
- NOTICE:
- Be sure to wave a magnetic object during the inspection. The current will not change without waving the magnetic object as indicated by the arrow in the illustration.
Measure the current according to the value(s) in the table below.
- Standard Current:
Tester Connection
| Condition
| Specified Condition
|
1 (NTO) - 2 (NTB)
| Low Signal
| 4 to 8 mA
|
1 (NTO) - 2 (NTB)
| High Signal
| 12 to 16 mA
|
Text in Illustration*1
| Component without harness connected
(Transmission Revolution Sensor (NT))
|
*2
| Ammeter
|
*3
| Magnetic Object
|
If the result is not as specified, replace the transmission revolution sensor (NT).
| 3. INSPECT TRANSMISSION REVOLUTION SENSOR (NOUT) |
Connect the battery to the sensor as shown in the illustration.
Wave a magnetic object left and right in front of the tip of the transmission revolution sensor (5 mm (0.197 in.) gap or closer) to change the high/low signals while measuring the current.
- NOTICE:
- Be sure to wave a magnetic object during the inspection. The current will not change without waving the magnetic object as indicated by the arrow in the illustration.
Measure the current according to the value(s) in the table below.
- Standard Current:
Tester Connection
| Condition
| Specified Condition
|
1 (NOTO) - 2 (NOTB)
| Low Signal
| 4 to 8 mA
|
1 (NOTO) - 2 (NOTB)
| High Signal
| 12 to 16 mA
|
Text in Illustration*1
| Component without harness connected
(Transmission Revolution Sensor (NOUT))
|
*2
| Ammeter
|
*3
| Magnetic Object
|
If the result is not as specified, replace the transmission revolution sensor (NOUT).
