Vehicle Stability Control System Dtc Check / Clear

Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Brake Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. CHECK DTC (When Using Intelligent Tester)

  1. CLEAR DTC (When Using Intelligent Tester)

  1. CHECK DTC (When not Using Intelligent Tester)

  1. CLEAR DTC (When not Using Intelligent Tester)

  1. END OF DTC CHECK/CLEAR

Vehicle Stability Control System -- Dtc Check / Clear



CHECK DTC (When Using Intelligent Tester)

  1. Turn the ignition switch off and connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Read the DTCs by following the prompts on the intelligent tester screen.

    HINT:
    Refer to the intelligent tester operator manual for further details.

CLEAR DTC (When Using Intelligent Tester)

  1. Turn the ignition switch off and connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Operate the intelligent tester to clear the DTCs.

    HINT:
    Refer to the intelligent tester operator manual for further details.

CHECK DTC (When not Using Intelligent Tester)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Vehicle Stability Control System Dtc Check / Clear

  1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  2. Turn the ignition switch to ON.

  3. w/ Multi Information Display:
    Read DTCs from the multi information display on the combination meter.
    w/o Multi Information Display:
    Read DTCs from the ABS warning light and slip indicator light on the combination meter.

    HINT:
    1. If the ABS warning light and slip indicator light do not blink, perform relevant troubleshooting procedures. The relevant troubleshooting procedures are in the sections listed in the table below.
      Trouble Area
      		See Procedure
      ABS warning light circuit
      		RAV4_ACA30 RM000000OSE01PX.html or RAV4_ACA30 RM000000OSG01WX.html
      Slip indicator light circuit
      		RAV4_ACA30 RM000001K2D00NX.html or RAV4_ACA30 RM000001K2E00NX.html
      TC and CG terminal circuit
      		RAV4_ACA30 RM000000OSL01SX.html

    2. As an example, the blinking patterns of the normal system code and DTCs 11 and 21 are shown below.


      Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Vehicle Stability Control System Dtc Check / Clear

  4. Check the details of the DTCs.

    DTC Chart for ABS:
    Multi Information Display
    ABS Warning Light Display
    		Intelligent Tester Display
    11
    		C0278
    12
    		C0279
    13
    		C0273
    14
    		C0274
    21
    		C0226
    22
    		C0236
    23
    		C0246
    24
    		C0256
    25
    		C1225
    31
    		C1401
    C1405
    32
    		C1402
    C1406
    33
    		C1403
    C1407
    34
    		C1404
    C1408
    35
    		C1413
    36
    		C1414
    37
    		C1337
    38
    		C1415
    39
    		C1416
    41
    		C1241
    C1417
    43
    		C1243
    44
    		C1419
    C1420
    C1442
    45
    		C1245
    46
    		C1421
    C1422
    C1423
    C1424
    49
    		C1425
    C1426
    51
    		C1427
    C1428
    67
    		C1429
    C1430
    C1431
    91
    		C1361
    94
    		U0073
    95
    		U0124
    97
    		C1381

    DTC Chart for VSC:
    Multi Information Display
    Slip Indicator Light Display
    		Intelligent Tester Display
    31
    		C1432
    C1433
    C1434
    32
    		C1232
    34
    		C1435
    C1436
    C1443
    36
    		C1210
    39
    		C1336
    43 (*1)
    		-
    51
    		C1201
    53
    		C1203
    62
    		U0123
    63
    		U0126
    64
    		C1380
    65
    		C1437
    U0100
    66
    		C1290
    C1439
    C1445
    98
    		C1440
    C1441
    HINT:
    *1: This DTC is output when the VSC system detects a malfunction in the ABS.

  5. After completing the check, disconnect SST from terminals 13 (TC) and 4 (CG) of the DLC3, and turn the ignition switch off.

    HINT:
    If 2 or more malfunctions are stored at the same time, the lowest numbered DTC is output first.

CLEAR DTC (When not Using Intelligent Tester)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Vehicle Stability Control System Dtc Check / Clear

  1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  2. Turn the ignition switch to ON.



    3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  3. Clear the DTCs stored in the skid control ECU by depressing the brake pedal 8 times or more within 5 seconds.

  4. Check that the ABS warning light and slip indicator light come on.

  5. Remove SST from the terminals of the DLC3.

  6. Turn the ignition switch off.

    HINT:
    Clearing the DTCs cannot be performed by removing the cable from the negative (-) battery terminal or the ECU-IG1 fuse.

END OF DTC CHECK/CLEAR

  1. Turn the ignition switch to ON.

  2. Check that the ABS warning light and slip indicator light go off within approximately 3 seconds.

  3. Turn the ignition switch off.