Body Electrical. Lexus Is250, Is220D. Gse20 Ale20
Lighting. Lexus Is250, Is220D. Gse20 Ale20
Glove Box Light -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here)
| 2. REMOVE FRONT DOOR SCUFF PLATE RH (w/o Illumination) |
- HINT:
- Use the same procedures for the RH side and the LH side.
| 3. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Illumination) |
| 4. REMOVE FRONT DOOR OPENING TRIM COVER RH |
Disengage the 6 claws and remove the front door opening trim cover RH.
 |
| 5. REMOVE SIDE INSTRUMENT PANEL RH |
Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel RH.
 |
| 6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Using a moulding remover, disengage the 4 clips and remove the No. 2 instrument panel under cover sub-assembly.
 |
| 7. REMOVE PASSENGER SIDE KNEE AIRBAG ASSEMBLY |
Remove the 3 bolts and front passenger side knee airbag assembly.
 |
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
| 8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
Remove the 5 screws <E>.
 |
Disengage the 2 claws.
Disconnect the connectors and remove the glove compartment door assembly.
| 9. REMOVE GLOVE BOX LIGHT ASSEMBLY |
Remove the glove box light assembly.
 |