Engine. Lexus Is250, Is220D. Gse20 Ale20
2Ad-Fhv Charging. Lexus Is250, Is220D. Gse20 Ale20
Generator -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE RADIATOR SUPPORT OPENING COVER |
Remove the 11 clips and intake duct seal.
![]() |
3. REMOVE NO. 1 INLET AIR CLEANER |
Remove the bolt, clip and inlet air cleaner.
![]() |
4. REMOVE NO. 1 ENGINE COVER |
Remove the No. 1 engine cover.
![]() |
5. REMOVE V-RIBBED BELT |
Release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.
![]() |
While turning the belt tensioner counterclockwise, align its holes, and then insert a 5 mm (0.20 in.) bar into the holes to hold the belt tensioner.
6. REMOVE GENERATOR ASSEMBLY |
Disconnect the generator connector.
![]() |
Remove the bolt and disconnect the wire harness clamp bracket.
Remove the nut and disconnect the wire harness from terminal B.
Disconnect the clamp from the clamp bracket.
Remove the 3 bolts (A) and generator assembly.
![]() |
Remove the bolt (B) and clamp bracket from the generator assembly.