Theft Deterrent System (W/ Intrusion Sensor) Data List / Active Test

Securities. Lexus Is250, Is220D. Gse20 Ale20
Theft Deterrent. Lexus Is250, Is220D. Gse20 Ale20
  1. DATA LIST

  1. ACTIVE TEST

Theft Deterrent System (W/ Intrusion Sensor) -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester Data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data list early in troubleshooting is one way to shorten labor time.
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Enter the following menus: Body / Main Body or Body No. 5 / Data List.

  4. Read the Data list according to the display on the tester.

    Main Body (Main body ECU RH):
    Item
    Measurement Item/Display (Range)
    Normal Condition
    Diagnostic Note
    Warning by Horn
    Warning by horn/ON or OFF
    ON: Vehicle horns and security horn*1 sound during alarm sounding state
    OFF: Vehicle horns and security horn*1 do not sound during alarm sounding state
    -
    Warning by Self Power Siren*2
    Warning by theft warning siren ON / OFF
    ON: Theft warning siren sound during alarm sounding state
    OFF: Theft warning siren does not sound during alarm sounding state.
    -
    Luggage Courtesy SW
    Luggage compartment door courtesy switch/ON or OFF
    ON: Luggage compartment door is OPEN
    OFF: Luggage compartment door is CLOSED
    -
    IG SW
    Ignition switch signal/ON or OFF
    ON: Turn the engine switch on (IG) or start
    OFF: Turn the engine switch off or on (ACC)
    -
    D Door Courtesy SW
    D door courtesy switch/ON or OFF
    ON: Driver side door is OPEN
    OFF: Driver side door is CLOSED
    -
    P Door Courtesy SW
    P door courtesy switch/ON or OFF
    ON: Front passenger side door is OPEN
    OFF: Front passenger side door is CLOSED
    -
    Rear Door Courtesy SW
    Rear door courtesy switch/ON or OFF
    ON: Rear door is OPEN
    OFF: Rear door is CLOSED
    -
    Rear Lock Position SW
    Rear lock position switch/ON or OFF
    ON: Rear door is LOCKED
    OFF: Rear door is UNLOCKED
    -
    Passenger Lock Position SW
    Passenger lock position switch/ON or OFF
    ON: Passenger door is LOCKED
    OFF: Passenger door is UNLOCKED
    -
    Intrusion Sen Detect
    Intrusion sen detect signal / ON or OFF
    ON: Moving object detected by sensor during arming preparation state or armed state
    OFF: No moving object detected by sensor.
    -

    Body No. 5 (Front controller):
    Item
    Measurement Item/Display (Range)
    Normal Condition
    Diagnostic Note
    Hood Courtesy Switch
    Engine hood courtesy switch signal/ON or OFF
    ON: Engine hood is OPEN
    OFF: Engine hood is CLOSED
    -

    HINT:
    1. *1: Australia, New Zealand
    2. *2: Europe

ACTIVE TEST
HINT:
Performing the intelligent tester Active test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active test early in troubleshooting is one way to shorten the labor time. The Data list can be displayed during the Active test.
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Enter the following menus: Body / Main Body or Body No. 5 / Active Test.

  4. Perform the Active test according to the display on the tester.

    Main Body (Main body ECU RH):
    Item
    Tester Detail
    Diagnostic Note
    Security Indicator
    Security indicator ON/OFF
    -
    Security Horn*1
    Security horn ON/OFF
    -
    Hazard
    Hazard warning light ON/OFF
    -
    Intrusion Sensor Power
    Intrusion sensor power ON/OFF
    -
    Security Horn*2
    Theft warning siren ON/OFF
    -

    HINT:
    1. *1: Australia, New Zealand
    2. *2: Europe