Cruise Control System. Lexus Is250, Is220D. Gse20 Ale20
Cruise Control. Lexus Is250, Is220D. Gse20 Ale20
Dynamic Radar Cruise Control System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuse and relay related to this system before inspecting the suspected areas below.
Symptom | Suspected area | See page |
Main switch cannot be turned ON. (CRUISE main indicator light on combination meter does not illuminate.) | 1. Cruise control switch circuit | Click here |
2. CRUISE main indicator light circuit | Click here | |
3. ECM | Click here | |
Vehicle speed setting cannot be done. (CRUISE main indicator light on combination meter illuminates when main switch is turned ON, but turns off when operating SET function.) | 1. Cruise control switch circuit | Click here |
2. ECM | Click here | |
Vehicle speed setting cannot be done. (CRUISE main indicator light on combination meter illuminates when main switch is turned ON, and remains on when operating SET function.) | 1. Cruise control switch circuit | Click here |
2. Stop light switch circuit | Click here | |
3. Park/Neutral position switch circuit | Click here | |
4. Shift paddle switch circuit | Click here | |
5. Vehicle speed sensor circuit | Click here | |
6. Transmission control switch circuit | Click here | |
7. Combination meter system | Click here | |
8. ECM | Click here | |
While vehicle is driven with cruise control, the control is canceled. (CRUISE main indicator light remains on.) | 1. Cruise control switch circuit | Click here |
2. Vehicle speed sensor circuit | Click here | |
3. Stop light switch circuit | Click here | |
4. Combination meter system | Click here | |
5. Park/Neutral position switch circuit | Click here | |
5. Shift paddle switch circuit | Click here | |
6. ECM | Click here | |
Hunting (Speed is not constant.) | 1. Vehicle speed sensor circuit | Click here |
2. Malfunction in speed meter circuit | Click here | |
3. Millimeter wave radar sensor power source circuit | Click here | |
4. Distance control ECU power source circuit | Click here | |
5. Distance control ECU | Click here | |
6. ECM | Click here | |
Vehicle speed setting cannot be canceled. (When coast, acceleration, resume, set speed change function is operated with control switch.) | 1. Cruise control switch circuit | Click here |
2. ECM | Click here | |
Erroneous detection or lost sight of the vehicle ahead. | 1. Clean radar sensor with soft cloth, etc. | - |
2. Improper aiming of sensor beam axis | Click here | |
Alarm buzzer does not sound. | 1. Buzzer circuit | Click here |
2. VSC system | Click here | |
3. Millimeter wave radar sensor power source circuit | Click here | |
4. Distance control ECU power source circuit | Click here | |
5. Distance control ECU | Click here | |
6. ECM | Click here | |
Set distance cannot be changed. | 1. Combination meter system | Click here |
2. Distance control switch circuit | Click here | |
3. Cruise control switch circuit | Click here | |
4. Distance control ECU | Click here | |
5. ECM | Click here | |
No information on the display | 1. Combination meter system | Click here |
2. ECM | Click here | |
No brake control (when decelerating) | 1. VSC system | Click here |
2. Distance control ECU power source circuit | Click here | |
3. Distance control ECU | Click here | |
4. ECM | Click here | |
Constant speed mode cannot be turned on. | 1. Cruise control switch circuit | Click here |
2. Combination meter system | Click here | |
3. ECM | Click here | |
Vehicle speed cannot be canceled with wiper HI. (Including automatic wiper) | 1. Rain sensor system | Click here |
2. Wiper switch circuit | Click here | |
3. Distance control ECU | Click here | |
4. ECM | Click here | |
Setting cannot be canceled in SNOW mode. | 1. Pattern select switch circuit | Click here |
2. Automatic transmission system | Click here | |
3. ECM | Click here | |
Unable to adjust (complete) beam axis of millimeter wave radar sensor. | 1. Check for DTC P1570 | Click here |
2. Check position, distance and angle of reflector | Click here | |
3. Check installation of millimeter wave radar sensor | Click here | |
4. Millimeter wave radar sensor | Click here | |
5. Distance control ECU | Click here | |
6. ECM | Click here | |
Cannot change between constant speed control mode and vehicle-to-vehicle distance control mode. | 1. Cruise control switch circuit | Click here |
2. Millimeter wave radar sensor power source circuit | Click here | |
3. Distance control ECU | Click here | |
4. ECM | Click here |