Rear No. 2 Upper Control Arm Removal

Remove the 2 nuts and the differential No.2 support protector.

Remove the bolt and nut, and separate the rear stabilizer link assembly and the load sensing valve sensor bracket from the rear No.2 suspension arm.

Remove the bolt and nut, and separate the rear shock absorber with coil spring from the rear No.2 suspension arm assembly

Remove the nut on the axle carrier side.

SST

09628-00011

Using SST, separate the rear No.2 upper control arm.

NOTICE:

1. Securely tie the string of the SST to the vehicle.
   
2. Do not damage the dust cover.
   
3. Securely set the SST on the spacer of the axle carrier.
   
4. If the spacer of the axle carrier comes off, replace the axle carrier with a new one.
   

Remove the bolt, nut, washer, and rear No.2 upper control arm.

HINT:

Push the axle carrier downward.