Dtc C1773 Vgrs Ecu Malfunction
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK DTC
DTC C1773 VGRS ECU Malfunction |
DESCRIPTION
- The absorber control ECU inputs the signals from the steering control ECU via CAN communication.
- The fail-safe function prohibits roll posture control if any malfunction occurs in the steering control ECU (Click here).
DTC No.
| DTC Detection Condition
| Trouble Area
|
C1773
| The fail flag signal is received from the steering control ECU for 5 seconds.
| - VGRS system
- CAN communication system
|
WIRING DIAGRAM
INSPECTION PROCEDURE
Clear the DTC (Click here).
Turn the engine switch off.
Turn the engine switch on (IG) again and check that no CAN communication system DTC is output.
Start the engine.
Drive the vehicle and turn the steering wheel to the right and left at the speed of 35 km/h (24 mph) to check that a DTC is output (Click here).
- Result:
Result
| Proceed To
|
Only C1773 is output
| A
|
CAN communication DTC is output
| B
|
| REPAIR CIRCUIT INDICATED BY OUTPUT CODE |
|
|