Brake. Brake Master Cylinder (W/ Ecb) On-Vehicle Inspection

Brake. Lexus Gs430, Gs300. Uzs190 Grs190

INSPECT BRAKE MASTER CYLINDER SUB-ASSEMBLY
INSPECT STROKE SIMULATOR

Brake Master Cylinder (W/ Ecb) -- On-Vehicle Inspection

NOTICE:

A DTC may be stored during the inspection procedure. Be sure to clear the DTC and check that a normal system code is output after the inspection is finished.

1. INSPECT BRAKE MASTER CYLINDER SUB-ASSEMBLY

Check battery voltage
Standard Value:
10 to 14 V (while the engine is switched off)

Connect intelligent tester and pedal effort gauge.
1. Connect the pedal effort gauge.
2. Move the shift lever to the P position. Apply the parking brake and connect the intelligent tester to the DLC3.
3. Turn the engine switch on (IG).
4. Clear the DTC. (Click here)

Check operation w/o brake booster.

Check and adjust brake pedal height. (Click here)
Check and adjust brake pedal stroke sensor. (Click here)
Check pedal free play. (Click here)
Check pedal reserve distance. (Click here)
Turn on the intelligent tester and select "ECB INVALID" to prohibit the brake control (ECB).
Monitor "MAS CYL PRS 1", "MAS CYL PRS 2", "PEDAL STROKE" and "PEDAL STROKE 2" using the intelligent tester.

Check the value output from "MAS CYL PRS 1", "MAS CYL PRS 2", "PEDAL STROKE" and "PEDAL STROKE 2" by depressing the brake pedal.

Standard Voltage:

Pedal Effort N (kgf, lbf)	MAS CYL PRS 1 (V)	MAS CYL PRS 2 (V)	PEDAL STROKE (V)	PEDAL STROKE 2 (V)
200 (20.4, 45)	0.75 to 1.05	0.75 to 1.05	1.8 to 2.2	2.8 to 3.2
500 (51,112)	1.45 to 1.75	1.45 to 1.75	2.05 to 2.45	2.55 to 2.95

Finish the brake control prohibition on the intelligent tester.

2. INSPECT STROKE SIMULATOR

Check battery voltage
Standard Value:
10 to 14 V (while the engine is switched off)

Connect intelligent tester and pedal effort gauge.
1. Connect the pedal effort gauge.
2. Move the shift lever to the P position. Apply the parking brake and connect the intelligent tester to the DLC3.
3. Turn the engine switch on (IG).
4. Clear the DTC. (Click here)

Check operation w/o brake booster.

Check and adjust brake pedal height. (Click here)
Check and adjust brake pedal stroke sensor. (Click here)
Check pedal free play. (Click here)
Check pedal reserve distance. (Click here)
Turn on the intelligent tester and select "ECB INVALID" to prohibit the brake control (ECB).
Monitor "MAS CYL PRS 1", "MAS CYL PRS 2", "PEDAL STROKE" and "PEDAL STROKE 2" using the intelligent tester.

Check the value output from "MAS CYL PRS 1", "MAS CYL PRS 2", "PEDAL STROKE" and "PEDAL STROKE 2" by depressing the brake pedal.

Standard Voltage:

Pedal Effort N (kgf, lbf)	MAS CYL PRS 1 (V)	MAS CYL PRS 2 (V)	PEDAL STROKE (V)	PEDAL STROKE 2 (V)
200 (20.4, 45)	0.75 to 1.05	0.75 to 1.05	1.8 to 2.2	2.8 to 3.2
500 (51,112)	1.45 to 1.75	1.45 to 1.75	2.05 to 2.45	2.55 to 2.95

Finish the brake control prohibition on the intelligent tester.

Check operation w/ brake booster
1. Turn the engine switch on (IG).
2. Turn on the intelligent tester and monitor the value of "PEDAL STROKE" and "PEDAL STROKE 2".
3. Depress the brake pedal 4 or 5 times.
4. Check the value output from "PEDAL STROKE" and "PEDAL STROKE 2" by depressing the brake pedal.
  
  Standard Voltage:
  
  Pedal Effort
  N (kgf, llbf)
  PEDAL STROKE
  (V)
  PEDAL STROKE 2
  (V)
  50 (5.1 11)
  1.4 to 1.8
  3.2 to 3.6
  100 (10.2, 22)
  1.55 to 1.95
  3.05 to 3.45
  150 (15.3, 34)
  1.65 to 2.05
  2.95 to 3.35
  200 (20.4, 45)
  1.7 to 2.1
  2.9 to 3.3

Pedal Effort N (kgf, llbf)	PEDAL STROKE (V)	PEDAL STROKE 2 (V)
50 (5.1 11)	1.4 to 1.8	3.2 to 3.6
100 (10.2, 22)	1.55 to 1.95	3.05 to 3.45
150 (15.3, 34)	1.65 to 2.05	2.95 to 3.35
200 (20.4, 45)	1.7 to 2.1	2.9 to 3.3