Child Restraint Seat Tether Anchor Removal

Detach the seat cushion's 2 front hooks from the vehicle body.

NOTICE:

Follow the instructions below carefully as the cushion frame deforms easily.

1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
   

2. Repeat for the other hook.
   

Detach the seat cushion's 2 rear hooks from the seatback.

Remove the seat cushion.

Using a screwdriver, detach the claws and remove the 2 rear seat covers.

HINT:

Tape the screwdriver tip before use.

Using a screwdriver, detach the claw to open the cap of the 3 rear seat shoulder belt guides.

Remove the bolt and floor anchor part.

Remove the 4 bolts and 2 nuts.

Remove the seatback.

Remove the bolt and anchor part of the rear seat outer belt assembly.

Disconnect the connector labeled A.

Remove the bolt and seat belt labeled B.

Detach the 5 claws and remove the scuff plate.

Using a moulding remover, pull the garnish in the direction indicated by the arrow in the illustration to detach the 5 claws. Then remove the garnish.

Detach the 4 clips.

Pull the garnish in the direction indicated by the arrow in the illustration to detach the 2 claws. Then remove the garnish.

Detach the 2 clips and 2 claws, and remove the anchor cover.

Using a moulding remover, detach the 4 claws and remove the belt guide LH.

HINT:

Use the same procedures described for the RH side.

Using a moulding remover, detach the 4 claws and remove the belt guide center.

Detach the clip and remove the panel.

Using a moulding remover, detach the 4 claws and remove the guide part of the rear seat outer belt assembly.

Using a moulding remover, detach the 4 claws and remove the guide part of the rear seat inner with center belt assembly RH.

Detach the clip and 5 claws.

Disconnect the connector and remove the package tray trim panel.

Remove the bolt and anchor bracket.