Headlight Washer Actuator Removal

Body Electrical. Lexus Gs430, Gs300. Uzs190 Grs190
Wiper And Washer. Lexus Gs430, Gs300. Uzs190 Grs190

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE COOL AIR INTAKE DUCT SEAL

  3. REMOVE ENGINE UNDER COVER

  4. REMOVE FRONT FENDER LINER LH

  5. REMOVE FRONT FENDER LINER RH

  6. REMOVE FRONT BUMPER COVER

  7. REMOVE HEADLIGHT ASSEMBLY

  8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY

  9. REMOVE HEADLIGHT CLEANER HOSE

Headlight Washer Actuator -- Removal


HINT:
  1. Use the same procedures for both the RH and LH sides.
  1. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE COOL AIR INTAKE DUCT SEAL


Lexus Gs430, Gs300. Uzs190 Grs190.Wiper And Washer.Wiper And Washer System.Headlight Washer Actuator Removal

  1. Remove the 7 clips and duct seal.



3. REMOVE ENGINE UNDER COVER


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Using a clip remover, remove the 3 clips.

  1. Remove the 10 screws and under cover.



4. REMOVE FRONT FENDER LINER LH


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Using a screwdriver, remove the 2 clips.

  1. Partially remove the fender liner.

    HINT:
    It is not necessary to fully remove the fender liner. Partially remove it so that the bumper assembly can be removed later.


5. REMOVE FRONT FENDER LINER RH
HINT:
Use the same procedures described for the LH side.


6. REMOVE FRONT BUMPER COVER

  1. Using a clip remover, remove the 2 clips.

    HINT:
    Put protective tape under the front fender.


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 6 screws and 5 bolts.



    Lexus Gs430, Gs300. Uzs190 Grs190.Wiper And Washer.Wiper And Washer System.Headlight Washer Actuator Removal

  1. Pull the bumper cover to detach the 3 claws on the LH side.

  1. Pull the bumper cover to detach the 3 claws on the RH side and remove the bumper cover.

  1. w/ Clearance sonar system:
    Disconnect the ultrasonic sensor connector.



7. REMOVE HEADLIGHT ASSEMBLY


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Disconnect the connector as shown in the illustration.



    Lexus Gs430, Gs300. Uzs190 Grs190.Wiper And Washer.Wiper And Washer System.Headlight Washer Actuator Removal

  1. Remove the 3 bolts.

  1. w/ Headlight cleaner:
    Disconnect the headlight cleaner hose.

  1. Detach the claw and remove the headlight.



8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 2 screws and headlight washer actuator.



9. REMOVE HEADLIGHT CLEANER HOSE

  1. Disconnect the hose from the headlight cleaner motor and pump.



    Lexus Gs430, Gs300. Uzs190 Grs190.Wiper And Washer.Wiper And Washer System.Headlight Washer Actuator Removal

  1. Using a screwdriver, detach the 5 clamps and remove the hose.

    HINT:
    Tape the screwdriver tip before use.