Injector Driver Installation

Engine. Lexus Gs430, Gs300. Uzs190 Grs190
3Gr-Fse Fuel. Lexus Gs430, Gs300. Uzs190 Grs190

  1. INSTALL INJECTOR DRIVER

  2. INSTALL NO.1 ENGINE COVER

  3. INSTALL AIR CLEANER INLET

  4. INSTALL COOL AIR INTAKE DUCT SEAL

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. PERFORM INITIALIZATION

Injector Driver -- Installation



1. INSTALL INJECTOR DRIVER


Lexus Gs430, Gs300. Uzs190 Grs190
NOTICE:
  1. Be careful not to drop or strike the injector driver.
  2. The injector driver is grounded at the bolt and nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of the injector driver and engine before installing the injector driver.

  1. Install the injector driver with the bolt and 2 nuts.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}


2. INSTALL NO.1 ENGINE COVER


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Install the cover with the 3 clips.

  1. Connect the 4 connectors.

    NOTICE:
    Clip the connector securely.


3. INSTALL AIR CLEANER INLET


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Install the air cleaner inlet with the bolt.

    Torque:
    5.0 N*m{51 kgf*cm, 44 in.*lbf}


4. INSTALL COOL AIR INTAKE DUCT SEAL


Lexus Gs430, Gs300. Uzs190 Grs190.3Gr-Fse Fuel.Fuel System.Injector Driver Installation

  1. Install the intake duct seal with the 7 clips.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.