Rear Seat Airbag Assembly Installation

Engage the 3 claws and install the rear seat airbag assembly.

Install the 2 bolts. Be sure to tighten bolt A before tightening bolt B.

Torque:

14 N*m{143 kgf*cm, 10 ft.*lbf}

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.

Attach the 5 claws to install the scuff plate.

Pull out the folded lip of the weatherstrip.

Place the seatback in the cabin.

NOTICE:

Be careful not to damage the vehicle body.

Install the seatback with the 4 bolts and 2 nuts.

Torque:

18.1 N*m{185 kgf*cm, 13 ft.*lbf}

Install the 2 rear seat covers.

Pass the 3 seat belts through and close the cap of the 3 rear seat shoulder belt guides.

Install the floor anchor part with the bolt.

Attach the seat cushion's 2 rear hooks to the seatback.

Attach the seat cushion's 2 front hooks to the vehicle body.

Confirm that the seat cushion is firmly installed.

NOTICE:

When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.