Rear Seat Inner Belt Assembly -- Installation |
| 1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH |
- NOTICE:
- Do not disassemble the retractor.
Align the seat belt positioning hole with the claw and install the retractor of the seat belt with the bolt as shown in the illustration.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
 |
| 2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade) |
Attach the clip to install the package tray trim panel.
 |
Attach the 4 claws to install the belt guide center.
Attach the 4 claws to install the belt guide.
 |
Attach the 4 claws to install the belt guide.
 |
| 3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY |
Install the package tray trim panel.
Connect the connector.
Attach the 5 claws and clip to install the panel.
 |
| 4. INSTALL ROOF SIDE GARNISH INNER |
Attach the 2 claws and 4 clips, and install the garnish.
| 5. INSTALL REAR SEAT SIDE GARNISH |
 |
Attach the 5 claws and install the garnish.
Pull out the folded lip of the weatherstrip.
| 6. INSTALL REAR DOOR SCUFF PLATE |
 |
Attach the 5 claws to install the scuff plate.
Pull out the folded lip of the weatherstrip.
| 7. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH |
 |
Install the seat belt with the bolt as shown in the illustration.
Connect the connector labeled A.
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH |
 |
Install the anchor part of the rear seat inner with center belt assembly RH seat belt with the bolt as shown in the illustration.
Connect the connector labeled A.
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 9. INSTALL REAR SEAT BELT OUTER ANCHOR |
 |
Install the anchor part of the rear seat outer belt assembly with the bolt.
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 10. INSTALL REAR SEATBACK ASSEMBLY |
 |
Place the seatback in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Install the seatback with the 4 bolts and 2 nuts.
- Torque:
- 18.1 N*m{185 kgf*cm, 13 ft.*lbf}
Install the 2 rear seat covers.
Pass the 3 seat belts through and close the cap of the 3 rear seat shoulder belt guides.
Install the floor anchor part with the bolt.
| 11. INSTALL REAR SEAT HEADREST ASSEMBLY RH AND LH |
Install the 2 headrests.
| 12. INSTALL REAR SEAT CUSHION ASSEMBLY |
 |
Attach the seat cushion's 2 rear hooks to the seatback.
Attach the seat cushion's 2 front hooks to the vehicle body.
Confirm that the seat cushion is firmly installed.
- NOTICE:
- When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.
| 13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 14. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.