Front Seat Inner Belt Assembly Inspection
INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for LHD)
INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for LHD)
INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for RHD)
INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for RHD)
Front Seat Inner Belt Assembly -- Inspection |
| 1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for LHD) |
Measure the resistance of the buckle switch.
- Standard resistance:
Tester Connection
| Condition
| Specified Condition
|
d1-2 - d1-3
| Seat belt is fastened
| Below 1 Ω
|
d1-2 - d1-3
| Seat belt is unfastened
| 1 MΩ or higher
|
If the result is not as specified, replace the inner belt assembly.
| 2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for LHD) |
Measure the resistance of the buckle switch.
- Standard resistance:
Tester Connection
| Condition
| Specified Condition
|
c3-2 - c3-3
| Seat belt is fastened
| Below 1 Ω
|
c3-2 - c3-3
| Seat belt is unfastened
| 1 MΩ or higher
|
A2 - A4
| Seat belt is unfastened
| 1 MΩ or higher
|
A2 - A4
| Seat belt is fastened
(Apply more than 21.5 Nm (219 kgf cm, 15.9 ft. lbf) to occupant detection sensor)
| Below 1 Ω
|
A2 - A4
| Seat belt is unfastened
(Seat is not occupied)
| 1 MΩ or higher
|
If the result is not as specified, replace the inner belt assembly.
| 3. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for RHD) |
Measure the resistance of the buckle switch.
- Standard resistance:
Tester Connection
| Condition
| Specified Condition
|
c3-2 - c3-3
| Seat belt is fastened
| Below 1 Ω
|
c3-2 - c3-3
| Seat belt is unfastened
| 1 MΩ or higher
|
If the result is not as specified, replace the inner belt assembly.
| 4. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for RHD) |
Measure the resistance of the buckle switch.
- Standard resistance:
Tester Connection
| Condition
| Specified Condition
|
d1-2 - d1-3
| Seat belt is fastened
| Below 1 Ω
|
d1-2 - d1-3
| Seat belt is unfastened
| 1 MΩor higher
|
A2 - A4
| Seat belt is unfastened
| 1 MΩ or higher
|
A2 - A4
| Seat belt is fastened
(Apply more than 21.5 Nm (219 kgf cm, 15.9 ft. lbf) to occupant detection sensor)
| Below 1 Ω
|
A2 - A4
| Seat belt is unfastened
(Seat is not occupied)
| 1 MΩ or higher
|
If the result is not as specified, replace the inner belt assembly.
