Dtc 01-Dc Transmission Error (Camera)
DESCRIPTION
INSPECTION PROCEDURE
READ OUTPUT DTC (LAN MONITOR)
CHECK AVC-LAN HARNESS AND POWER SOURCE
CLEAR DTC
DTC 01-DC Transmission Error (CAMERA) |
DESCRIPTION
DTC No.
| DTC Detection Condition
| Trouble Area
|
01-DC
| Transmission to component shown by sub-code is failed
(detecting this DTC does not always mean actual failure)
| If the same sub-code is recorded in other components, check harness for power supply and communication system of all components shown by code
|
- HINT:
- This code may be stored if the engine is started, idled for 60 seconds, turned off, and then started again.
INSPECTION PROCEDURE
| 1.READ OUTPUT DTC (LAN MONITOR) |
Read the communication diagnostic check result (Click here).
- Result:
Display (Sub-code Output)
| Proceed to
|
Sub-code output
| A
|
No output
| B
|
| 2.CHECK AVC-LAN HARNESS AND POWER SOURCE |
Check these suspected areas when the sub-code is shown.
Sub-code Address
(Device Name)
| Suspected Area
|
110
(Multi-display)
| Power source circuit
(multi-display)
|
AVC-LAN circuit between radio receiver and multi-display
|
Multi-display
|
178
(Navigation ECU)
| Power source circuit
(navigation ECU)
|
AVC-LAN circuit (multi-display - navigation ECU)
|
Navigation ECU
|
190
(Radio Receiver Assembly)
| Power source circuit
(radio receiver assembly)
|
AVC-LAN circuit between multi-display and radio receiver
|
Radio receiver assembly
|
17D
(Telephone Transceiver and Speaker Relay)
| AVC-LAN circuit between stereo component amplifier and stereo component tuner
|
Telephone transceiver and speaker relay
|
1C6
(Gateway ECU)
| AVC-LAN circuit between radio receiver and gateway ECU
|
Gateway ECU
|
440
(Stereo Component Amplifier Assembly)
| Power source circuit
(stereo component amplifier assembly)
|
AVC-LAN circuit between stereo component amplifier and radio receiver
|
Stereo component amplifier assembly
|
| | CHECK AND REPAIR MALFUNCTIONING PART |
|
|
Clear the DTC (Click here).