Engine. Lexus Gs430, Gs300. Uzs190 Grs190
3Gr-Fse Ignition. Lexus Gs430, Gs300. Uzs190 Grs190
Ignition Coil -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE COOL AIR INTAKE DUCT SEAL |
 |
Remove the 7 clips and duct seal.
| 3. REMOVE ENGINE ROOM SIDE COVER RH |
 |
Loosen the nut and remove the 2 clips and side cover.
| 4. REMOVE ENGINE ROOM SIDE COVER LH |
 |
Remove the 3 clips and side cover.
| 5. REMOVE V-BANK COVER |
 |
Remove the 2 nuts and V-bank cover.
| 6. REMOVE NO. 2 VENTILATION HOSE |
Disconnect the ventilation hose from the cylinder head.
 |
| 7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE |
Disconnect the MAF meter connector.
 |
Disconnect the clamp from the air cleaner.
Disconnect the VSV for EVAP.
 |
Disconnect the 4 clamps.
 |
Remove the hose clamp and air cleaner cap with air cleaner hose.
| 8. REMOVE IGNITION COIL |
Disconnect the 2 wire harness clamps.
 |
Disconnect the 6 ignition coil connectors.
 |
Remove the 6 bolts and 6 ignition coils.