Oil Filter Replacement

Engine. Lexus Gs430, Gs300. Uzs190 Grs190
3Uz-Fe Lubrication. Lexus Gs430, Gs300. Uzs190 Grs190

  1. REMOVE OIL FILTER ELEMENT SERVICE HOLE COVER

  2. DRAIN ENGINE OIL

  3. REMOVE OIL FILTER SUB-ASSEMBLY

  4. INSTALL OIL FILTER SUB-ASSEMBLY

  5. ADD ENGINE OIL

  6. CHECK FOR ENGINE OIL LEAKS

  7. CHECK ENGINE OIL LEVEL

  8. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER

Oil Filter -- Replacement


CAUTION:
  1. Prolonged and repeated contact with mineral oil will result in the loss of natural oil from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
  2. Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash the area thoroughly with soap and waterless hand cleaner. Never use gasoline, thinners, or solvents to wash the skin.
  3. In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.


1. REMOVE OIL FILTER ELEMENT SERVICE HOLE COVER


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 6 screws and open the service hole cover.



2. DRAIN ENGINE OIL

  1. Remove the oil filler cap.

  1. Remove the oil drain plug and drain the oil into a container.



3. REMOVE OIL FILTER SUB-ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190.3Uz-Fe Lubrication.Lubrication System.Oil Filter Replacement

  1. Using SST, remove the oil filter.

    SST
    09228-07501


4. INSTALL OIL FILTER SUB-ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Check and clean the oil filter installation surface.

  1. Apply clean engine oil to the gasket of a new oil filter.

  1. Lightly screw the oil filter into place by hand. Tighten it until the gasket contacts the seat.



    Lexus Gs430, Gs300. Uzs190 Grs190.3Uz-Fe Lubrication.Lubrication System.Oil Filter Replacement

  1. Using SST, tighten the oil filter.

    SST
    09228-07501

    1. Depending on the workspace available, choose from the following.

      1. If enough space is available, use a torque wrench to tighten the oil filter.
      Torque:
      17.2 N*m{178 kgf*cm, 13 ft.*lbf}
      1. If not enough space is available to use a torque wrench, tighten the oil filter a 3/4 turn by hand or with a common wrench.


5. ADD ENGINE OIL

  1. Install a new gasket and the drain plug.

    Torque:
    39 N*m{398 kgf*cm, 29 ft.*lbf}

  1. Add new oil.

    Oil Capacity:
    Item
    		Capacity
    Drain and refill with oil filter change
    		5.2 liters (5.5 US qts, 4.6 lmp. qts)
    Drain and refill without oil filter change
    		4.5 liters (4.8 US qts, 4.0 lmp. qts)
    Dry fill
    		6.1 liters (6.4 US qts, 5.4 lmp. qts)

  1. Reinstall the oil filler cap.



6. CHECK FOR ENGINE OIL LEAKS


7. CHECK ENGINE OIL LEVEL

  1. Warm up the engine, stop the engine and wait 5 minutes. The oil level should be between the dipstick's low and full level mark.

    1. If low, check for leakage and add oil up to the full level mark.
      NOTICE:
      Do not fill the engine oil above the full level mark.
      HINT:
      SAE 5W-30 is the recommended choice for this engine for good fuel economy and good starting in cold weather.


8. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Install the service hole cover with the 6 screws.