Heater Fuel Pump Inspection
INSPECT FUEL PUMP SUB-ASSEMBLY
Heater Fuel Pump -- Inspection |
1. INSPECT FUEL PUMP SUB-ASSEMBLY |
Apply battery voltage and check the operation of the fuel pump sub-assembly, as shown in the table.
Text in Illustration*a
| Component without harness connected (Fuel Pump Sub-assembly)
|
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → Terminal 1 (E2) Battery negative (-) → Terminal 2 (B2)
| Fuel pump Sub-assembly operates smoothly
|
If the result is not as specified, replace the fuel pump sub-assembly.