Heater Fuel Pump Installation


  1. INSTALL FUEL PUMP SUB-ASSEMBLY

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Heater Fuel Pump -- Installation



1. INSTALL FUEL PUMP SUB-ASSEMBLY

  1. Install the fuel pump sub-assembly with the bolt.

    Torque:
    5.4 N*m{55 kgf*cm, 48 in.*lbf}

  1. Align the markings on each heater fuel hose as shown in the illustration and connect them with the clips.

    NOTICE:
    Do not apply excessive force to the hose.

  1. Attach the 2 clamps.



  1. Connect the connector.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Heater Fuel Pump Installation


    Text in Illustration
    *A
    		for Dual Air Conditioning System
    		-
    		-
    *a
    		Upper Side
    		*b
    		Lower Side
    *c
    		LH Side
    		*d
    		RH Side
    *d
    		Marking (White)
    		-
    		-


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Heater Fuel Pump Installation


    Text in Illustration
    *A
    		for Single Air Conditioning System
    		-
    		-
    *a
    		Upper Side
    		*b
    		Lower Side
    *c
    		LH Side
    		*d
    		RH Side
    *e
    		Marking (White)
    		-
    		-


2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

  1. Attach the 2 front clips to install the No. 1 engine cover sub-assembly.