Dtc C1694 Steering Angle Initialization Incomplete
DESCRIPTION
INSPECTION PROCEDURE
PERFORM CALIBRATION
CHECK DTC OUTPUT
DTC C1694 Steering Angle Initialization Incomplete |
DESCRIPTION
This DTC is stored when the rear television camera assembly judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).DTC Code
| DTC Detection Condition
| Trouble Area
|
C1694
| Maximum steering angle has not been memorized (steering angle setting is incomplete)
| - Steering angle setting
- Rear television camera assembly
|
INSPECTION PROCEDURE
- NOTICE:
- If the cable was disconnected from and reconnected to the negative (-) battery terminal, the estimated course lines may not be displayed on the image of the area behind the vehicle. In this case, perform "Correct the Steering Angle Neutral Point" (LandCruiser RM0000035DE05YX.html).
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (LandCruiser RM0000035DD06QX.html).
Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.
Steering angle setting (LandCruiser RM0000035DD06QX.html).
Clear the DTCs (LandCruiser RM0000035DB07IX.html).
Check for DTCs and check that no DTCs are output (LandCruiser RM0000035DB07IX.html).
- HINT:
- If DTC C1694 is output, perform the steering angle setting again.
- If DTC C1694 is still output after performing the steering angle setting 3 times, replace the rear television camera assembly.
ResultProceed to
| Result
|
DTC C1694 is not output
| A
|
DTC C1694 is output (w/ Tire Carrier)
| B
|
DTC C1694 is output (w/o Tire Carrier)
| C
|