Glow Plug Controller -- Installation |
| 1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET |
Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET |
Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 3. INSTALL GLOW PLUG CONTROLLER |
Install the glow plug controller with the 2 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the 4 connectors and clamp.
| 4. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Attach 12 new grommets to install the front fender splash shield sub-assembly LH.
 |
Install the bolt and 3 screws.
 |
| 5. INSTALL FRONT FENDER MUDGUARD LH |
Install the front fender mudguard with the 4 screws and 2 clips.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).