Toyota Parking Assist-Sensor System (W/ Multi-Display) Customize Parameters


  1. CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM

Toyota Parking Assist-Sensor System (W/ Multi-Display) -- Customize Parameters



1. CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Clearance Sonar / Warning, Sensor or Display.

    5. Select the setting by referring to the table below.

      Warning
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Rr Sensor Onset Range
      		Wide
      		Set the buzzer activation range for the rear center sensors.
      		Narrow or Wide
      1. Narrow: 650 mm (25.6 in.)
      2. Wide: 1500 mm (59.1 in.)
      		Clearance warning ECU
      Fr Sensor Onset Range
      		Wide
      		Set the buzzer activation range for the front center sensors.
      		Narrow or Wide
      1. Narrow: 600 mm (23.6 in.)
      2. Wide: 1000 mm (39.4 in.)
      		Clearance warning ECU
      Keep Sense Buzzer
      		Avail
      		Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.
      		Not Avail or Avail
      1. Not Avail: Not Available
      2. Avail: Available
      		Clearance warning ECU
      Fr & Rr Buzzer Volume
      		M2
      		Change the buzzer volume setting.
      		L, M1, M2, M3 or H
      1. L: Low volume
      2. M1: Medium low volume
      3. M2: Medium volume
      4. M3: Medium high volume
      5. H: High volume
      		Clearance warning ECU
      Sensor Condition N
      		Avail
      		Make the front sensors available when the shift lever is in N.
      		Not Avail or Avail
      1. Not Avail: Not Available
      2. Avail: Available
      		Clearance warning ECU
      Reverse Range Front Sensor
      		Fcrn
      		Change the operation setting for the front sensors when the shift lever is in R.
      		F, Fcrn or F Stop
      1. F: Front sensors are available
      2. Fcrn: Front corner sensors are available
      3. F Stop: Front sensors are not available
      		Clearance warning ECU
      Non P/R Range Rear Sensor
      		R Stop
      		Change the operation setting for the rear sensors when the shift lever is in any position except P or R.
      		R, Rcrn or R Stop
      1. R: All rear sensors are available
      2. Rcrn: Rear corner sensors are available
      3. R Stop: All rear sensors are not available
      		Clearance warning ECU
      Display Mode
      		All
      		Change the display mode setting (when the TOYOTA parking assist-sensor system is normal).
      		All or Undisp
      		Clearance warning ECU

  1. Customizing with Multi-display

    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle / TOYOTA Park Assist.

    3. Select the setting by referring to the table below.

      Display
      		Default
      		Content
      		Setting
      		Relevant
      Alert volume
      		3
      		Change the buzzer volume setting.
      		1, 2, 3, 4 or 5
      1. 1: Low volume
      2. 2: Medium low volume
      3. 3: Medium volume
      4. 4: Medium high volume
      5. 5: High volume
      		Clearance warning ECU
      Display
      		On
      		Change the display mode setting (when the TOYOTA parking assist-sensor system is normal).
      		On or Off
      		Clearance warning ECU
      Distance
      		Wide
      		Set the buzzer activation range for the front center sensors.
      		Narrow or Wide
      1. Narrow: 600 mm (23.6 in.)
      2. Wide: 1000 mm (39.4 in.)
      		Clearance warning ECU
      Set the buzzer activation range for the rear center sensors.
      		Narrow or Wide
      1. Narrow: 650 mm (25.6 in.)
      2. Wide: 1500 mm (59.1 in.)
      		Clearance warning ECU