Rear Seat Cushion Heater (For 60/40 Split Slide Walk-In Seat Type Rh Side) Removal


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

  2. REMOVE REAR SEAT UPPER RECLINING COVER RH

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

  4. REMOVE REAR SEAT CUSHION MOULDING RH

  5. REMOVE REAR SEAT REAR CUSHION MOULDING LH

  6. REMOVE SEAT CUSHION COVER WITH PAD

  7. REMOVE REAR NO. 2 SEAT PROTECTOR

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

  9. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

Rear Seat Cushion Heater (For 60/40 Split Slide Walk-In Seat Type Rh Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH
(LandCruiser RM00000468F00QX.html)


2. REMOVE REAR SEAT UPPER RECLINING COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear Seat Cushion Heater (For 60/40 Split Slide Walk-In Seat Type Rh Side) Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover RH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws and reclining adjuster release handle RH.



4. REMOVE REAR SEAT CUSHION MOULDING RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the clip.

  1. Using a moulding remover, detach the 3 claws.

  1. Move the rear seat cushion moulding RH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding RH.



5. REMOVE REAR SEAT REAR CUSHION MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw.

  1. Using a moulding remover, detach the 3 claws.

  1. Detach the 2 guides and remove the rear seat rear cushion moulding LH.



6. REMOVE SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:

    1. Disconnect the 2 rear seat heater connectors.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Pull out the wire harness as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hooks and remove the seat cushion cover with pad.



7. REMOVE REAR NO. 2 SEAT PROTECTOR


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 rear No. 2 seat protectors from the separate type rear seat cushion pad.



8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 14 hog rings and separate type rear seat cushion cover from the separate type rear seat cushion pad.



9. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear Seat Cushion Heater (For 60/40 Split Slide Walk-In Seat Type Rh Side) Removal

  1. Cut off the 23 tack pins and remove the rear seat cushion heater assembly from the separate type rear seat cushion cover.

    Text in Illustration
    *1
    		Tack Pin