Rear Seatback Heater (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation

Set the rear seatback heater assembly in place with the name stamp side facing the separate type rear seatback cover.

Install the rear seatback heater assembly with 11 new tack pins.

Set the separate type rear seatback cover in place.

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 8 new hog rings.

NOTICE:

1. Be careful not to damage the separate type rear seatback cover.
   
2. Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.
   

w/ Seat Heater System:

1. Connect the rear seatback heater assembly wire harness to the separate type rear seatback pad.
   

w/ Seat Heater System:

1. Install the wire harness as shown in the illustration.
   

   Text in Illustration

   *a	Paint Mark

Connect the outer belt to the seatback cover with pad.

Attach the hooks.

Using hog ring pliers, install the seatback cover with pad with 10 new hog rings.

NOTICE:

1. Be careful not to damage the separate type rear seatback cover.
   
2. Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.
   

Attach the 4 claws to install the 2 rear No. 1 seat headrest support assemblies.

Attach the 7 clips to install the rear seatback board carpet assembly LH.

Attach the 4 claws to install the rear seatback cover.

Connect the outer belt to the rear seat shoulder belt cover.

Attach the 2 guides and 2 claws to install the rear seat shoulder belt cover.

Attach the 2 claws to install the seat belt anchor cover cap.

Connect the cable in the order shown in the illustration to install the rear seat lock control lever sub-assembly LH.

Install the 2 screws.

Attach the guide and claw to install the reclining adjuster knob cap LH.

Install the inner belt and connect the 3 point type belt anchor with the bolt.

Torque:

42 N*m{428 kgf*cm, 31 ft.*lbf}

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

Install the center seatback assembly with the 2 bolts.

Torque:

21 N*m{214 kgf*cm, 15 ft.*lbf}

Attach the hook.

Attach the hooks to install the seat cushion cover with pad.

w/ Seat Heater System:

1. Pass the wire harness as shown in the illustration.
   





2. Connect the 2 rear seat heater connectors.
   

Move the rear seat cushion moulding LH in the direction of the arrow to attach the guide.

Attach the 3 claws and clip to install the rear seat cushion moulding LH.

Attach the 2 guides and install the center seat hinge cover LH with the clip.

Install the reclining adjuster release handle LH with the 3 screws.

Attach the 3 claws to install the rear seat upper reclining cover LH.