Intrusion Sensor Removal


  1. REMOVE MAP LIGHT ASSEMBLY

  2. REMOVE THEFT WARNING RADAR SENSOR

Intrusion Sensor -- Removal



1. REMOVE MAP LIGHT ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 clips.

  1. Disconnect the connector and remove the map light.



2. REMOVE THEFT WARNING RADAR SENSOR

  1. Disconnect the connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove all the tape and the 2 screws.

  1. Detach the clamp and disconnect the central part of the theft warning radar sensor.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a thin-bladed screwdriver, push the bezel down lightly.

    HINT:
    1. Perform the same procedure on the other side.
    2. Tape the screwdriver tip before use.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Insert the thin-bladed screwdriver into the cutout portion of the bezel and remove the bezel from the map light.

    HINT:
    1. Perform the same procedure on the other side.
    2. Tape the screwdriver tip before use.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 2 connectors.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws and theft warning radar sensor.

    HINT:
    Perform the same procedure on the other side.