Shift Lever Adjustment


  1. INSPECT SHIFT LEVER POSITION

  2. ADJUST SHIFT LEVER POSITION

Shift Lever -- Adjustment



1. INSPECT SHIFT LEVER POSITION

  1. When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, make sure that it moves smoothly and correctly into position.

  1. Check that the shift lever does not stop when moving the shift lever from R to P, and check that the shift lever does not stick when moving the shift lever from D to S.

  1. Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D and moves in reverse after moving the shift lever to R.
    If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the transmission floor shift assembly installation condition.



2. ADJUST SHIFT LEVER POSITION

  1. Remove the rear console box (LandCruiser RM0000046JD008X.html).

  1. Move the shift lever to N.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.A750F Automatic Transmission Transaxle.Automatic Transmission System (For 1Kd-Ftv).Shift Lever Adjustment

  1. Slide the slider in the direction shown in the illustration and pull out the lock piece.

    Text in Illustration
    *1
    		Slider
    *2
    		Lock Piece


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.A750F Automatic Transmission Transaxle.Automatic Transmission System (For 1Kd-Ftv).Shift Lever Adjustment

  1. Push the lock piece into the adjuster case and lock it.

    NOTICE:
    Make sure that the lock piece is completely locked by the slider.

  1. Install the rear console box (LandCruiser RM0000046JB008X.html).