Front Seatback Heater (For Walk In Seat Type) -- Removal |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the RH side.
| 1. REMOVE FRONT SEAT ASSEMBLY |
Remove the front seat assembly (LandCruiser RM0000046B800AX.html).
| 2. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
Remove the rubber band from the seat cushion spring.
 |
Disconnect the seat heater connector and detach the wire harness clamp.
 |
Remove the 3 hog rings.
 |
Open the 2 fasteners, and then open the seatback cover.
Text in Illustration *A for Cloth Seat *B for Leather Seat
w/ Front Seat Side Airbag:
Remove the nut and seatback cover bracket from the seat frame.
Disconnect the seatback cover bracket from the seatback pad.
 |
Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.
 |
Remove the hog rings and front seatback cover.
- HINT:
- The number of hog rings differs according to seat type.
Text in Illustration *A for Type A *B for Type B
| 3. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH |
Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.
Text in Illustration *1 Tack Pin
 |