Rear Center Seat Outer Belt Assembly (For 60/40 Split Tumble Seat Type Lh Side) Removal
REMOVE REAR NO. 1 SEAT ASSEMBLY LH
REMOVE REAR SEAT RECLINING COVER LH
REMOVE REAR NO. 1 SEAT RECLINING COVER RH
REMOVE REAR NO. 2 SEAT CUSHION
REMOVE REAR RECLINING ADJUSTER INSIDE COVER LH
REMOVE SEAT TRACK OPEN LEVER PIN SUB-ASSEMBLY
REMOVE REAR SEAT HINGE PAWL GUIDE
REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH
REMOVE REAR SEAT STAY SUB-ASSEMBLY
REMOVE REAR SEAT HINGE SUB-ASSEMBLY RH
REMOVE REAR SEAT CUSHION EDGE PROTECTOR
REMOVE REAR SEAT CUSHION SUPPORT SPRING
REMOVE REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH
REMOVE REAR NO. 2 SEAT HINGE COVER LH
REMOVE REAR NO. 2 SEAT HINGE COVER RH
REMOVE SEAT CUSHION COVER WITH PAD
DISCONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY ANCHOR LH
REMOVE REAR SEATBACK COVER
REMOVE NO. 1 SEATBACK PAD LH
REMOVE REAR SEAT INNER RECLINING COVER RH
REMOVE REAR SEAT CENTER ARMREST ASSEMBLY
REMOVE REAR SEAT CENTER ARMREST HINGE
REMOVE REAR SEAT ARMREST SUPPORT
REMOVE SHOULDER BELT ANCHOR COVER
REMOVE REAR SEAT SHOULDER BELT HOLE COVER LH
REMOVE REAR SEATBACK LOCK STRIKER COVER
REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
REMOVE SEATBACK COVER WITH PAD
REMOVE SEPARATE TYPE REAR SEATBACK COVER
REMOVE REAR SEAT INNER RECLINING COVER RH
REMOVE RECLINING ADJUSTER COVER LH
REMOVE REAR SEAT SHOULDER BELT GUIDE
REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
Rear Center Seat Outer Belt Assembly (For 60/40 Split Tumble Seat Type Lh Side) -- Removal |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH |
Remove the rear No. 1 seat assembly LH (LandCruiser RM0000046ZI006X.html).
2. REMOVE REAR SEAT RECLINING COVER LH |
Remove the 2 screws.
Using a moulding remover, detach the 2 claws.
Move the cover in the direction of the arrow to detach the guide and remove the cover.
3. REMOVE REAR NO. 1 SEAT RECLINING COVER RH |
Remove the 2 screws.
Using a moulding remover, detach the 2 claws.
Move the cover in the direction of the arrow to detach the guide.
Detach the 2 hooks and remove the cover.
4. REMOVE REAR NO. 2 SEAT CUSHION |
Remove the screw and cushion.
5. REMOVE REAR RECLINING ADJUSTER INSIDE COVER LH |
Remove the 2 screws.
Detach the 2 claws and remove the cover.
6. REMOVE SEAT TRACK OPEN LEVER PIN SUB-ASSEMBLY |
Using a screwdriver, remove the stopper.
Remove the pin as shown in the illustration.
- HINT:
- Use the same procedure for both pins.
7. REMOVE REAR SEAT HINGE PAWL GUIDE |
Detach the 4 claws and remove the pawl guide.
- HINT:
- Use the same procedure for both pawl guides.
8. REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH |
Using a screwdriver, remove the E-ring.
Remove the pin.
Using a screwdriver, detach the 10 claws.
- HINT:
- Tape the screwdriver tip before use.
Remove the 5 screws.
Disconnect the reclining release handle from the under cover.
Raise the under cover.
Using a screwdriver, remove the spring of the seat stay ball-joint.
Disconnect the seat stay from the seat cushion frame.
Remove the seat hinge and seat stay as a unit.
- NOTICE:
- The seat stay cannot be disconnected from the seat hinge. If the stay is disconnected from the hinge, replacement of both parts is necessary.
- HINT:
- If it is necessary to replace the seat hinge, replace it together with the seat stay as the stay cannot be disconnected from the hinge.
9. REMOVE REAR SEAT STAY SUB-ASSEMBLY |
- HINT:
- As the seat stay cannot be disconnected from the seat hinge, it is removed in the previous step.
- If it is necessary to replace the seat stay, replace it together with the seat hinge as the stay cannot be disconnected from the hinge.
10. REMOVE REAR SEAT HINGE SUB-ASSEMBLY RH |
Using a screwdriver, remove the E-ring.
Remove the pin and hinge.
11. REMOVE REAR SEAT CUSHION EDGE PROTECTOR |
Remove the protector from the cushion frame.
- HINT:
- Use the same procedure for both protectors.
12. REMOVE REAR SEAT CUSHION SUPPORT SPRING |
Remove the spring from the seat cushion frame.
- HINT:
- Use the same procedure for both springs.
13. REMOVE REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH |
Remove the under cover.
14. REMOVE REAR NO. 2 SEAT HINGE COVER LH |
Detach the 3 claws and remove the cover.
15. REMOVE REAR NO. 2 SEAT HINGE COVER RH |
Detach the 3 claws and remove the cover.
16. REMOVE SEAT CUSHION COVER WITH PAD |
Cut off the tack pins and remove the carpet from the cushion pad.
Text in Illustration*1
| Tack Pin
|
Remove the hog rings and seat cushion cover with pad.
17. DISCONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY ANCHOR LH |
Remove the bolt and disconnect the belt.
18. REMOVE REAR SEATBACK COVER |
Using a screwdriver, detach the 8 claws and remove the 2 covers.
- HINT:
- Tape the screwdriver tip before use.
19. REMOVE NO. 1 SEATBACK PAD LH |
Remove the bolt and disconnect the outer belt.
Detach the fastening tape and open the cover.
Text in Illustration*1
| Fastening Tape
|
Remove the 6 hog rings.
Open the 2 fasteners, and then open the seatback cover.
Remove the seatback pad.
20. REMOVE REAR SEAT INNER RECLINING COVER RH |
Remove the screw.
Detach the guide and remove the cover.
21. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY |
Remove the 2 bolts, center armrest and bush.
22. REMOVE REAR SEAT CENTER ARMREST HINGE |
Remove the screw and armrest hinge.
23. REMOVE REAR SEAT ARMREST SUPPORT |
Remove the armrest support.
24. REMOVE SHOULDER BELT ANCHOR COVER |
Using a screwdriver, detach the 2 claws and 2 guides, and then remove the cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
25. REMOVE REAR SEAT SHOULDER BELT HOLE COVER LH |
Detach the 4 claws and remove the cover.
Disconnect the outer belt.
26. REMOVE REAR SEATBACK LOCK STRIKER COVER |
Using a screwdriver, detach the claw and guide, and then remove the cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
27. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
Remove the 2 screws.
Disconnect the cable in the order shown in the illustration and remove the lever.
28. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY |
Detach the 8 claws and remove the 4 supports.
29. REMOVE SEATBACK COVER WITH PAD |
Detach the 2 hooks and remove the seatback cover with pad.
Disconnect the outer belt from the seatback cover with pad.
30. REMOVE SEPARATE TYPE REAR SEATBACK COVER |
Remove the hog rings and detach the fastening tape, and then remove the seatback cover from the seatback pad.
Text in Illustration*1
| Fastening Tape
| -
| -
|
31. REMOVE REAR SEAT INNER RECLINING COVER RH |
Detach the 2 claws and remove the cover.
32. REMOVE RECLINING ADJUSTER COVER LH |
Remove the 4 screws.
Detach the 4 claws and remove the cover.
33. REMOVE REAR SEAT SHOULDER BELT GUIDE |
Detach the 2 claws and open the cover.
Disconnect the seat belt from the belt guide.
Detach the 4 guides and remove the belt guide.
34. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH |
Remove the 3 nuts and belt sensor.
Remove the nut and seat belt.