Roof Headlining (For 3 Door) Disassembly


  1. REMOVE NO. 1 ROOF SILENCER PAD

  2. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

  3. REMOVE NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)

  4. REMOVE VANITY LIGHT ASSEMBLY LH

  5. REMOVE VANITY LIGHT ASSEMBLY RH

  6. REMOVE NO. 1 ROOF WIRE

  7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Roof Headlining (For 3 Door) -- Disassembly


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE NO. 1 ROOF SILENCER PAD


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/o Sliding Roof:

    1. Remove the 3 No. 1 roof silencer pads.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Sliding Roof:

    1. Remove the No. 1 roof silencer pad.



2. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the No. 2 roof silencer pad.



3. REMOVE NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the No. 4 roof silencer pad.



4. REMOVE VANITY LIGHT ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (For 3 Door) Disassembly

  1. Detach the 2 claws labeled A and separate the bulb holder from the vanity light as shown in the illustration.

  1. Detach the claw labeled B and remove the vanity light.

    Text in Illustration
    *1
    		Claw A
    *2
    		Claw B
    *3
    		Bulb Holder


5. REMOVE VANITY LIGHT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


6. REMOVE NO. 1 ROOF WIRE

  1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

  1. Detach each clamp and remove the No. 1 roof wire.



  1. Remove any butyl tape remaining on the roof headlining.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (For 3 Door) Disassembly


    Text in Illustration
    *A
    		w/o Sliding Roof
    		*B
    		w/ Sliding Roof
    *C
    		w/ Rain Sensor, for LHD
    		*D
    		w/ EC Mirror
    *E
    		w/ Rain Sensor, for RHD
    		-
    		-
    *1
    		Visor Connector
    		-
    		-


7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


  1. w/o Sliding Roof:


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (For 3 Door) Disassembly


    Text in Illustration
    *A
    		for Diversity
    		*B
    		for Diversity, w/ Digital Audio Broadcasting

    1. Detach the No. 2 antenna cord sub-assembly from the clamp and the notch on the rear of the roof headlining assembly.

    2. for Diversity:
      Detach the No. 2 antenna cord sub-assembly from the 6 clamps and the 2 notches on the rear of the roof headlining assembly.

    3. for Diversity, w/ Digital Audio Broadcasting:
      Detach the No. 2 antenna cord sub-assembly from the 7 clamps and the 2 notches on the rear of the roof headlining assembly.

    4. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

    5. Remove the double-sided tape from the roof headlining assembly.



  1. w/ Sliding Roof:


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (For 3 Door) Disassembly


    Text in Illustration
    *A
    		for Diversity
    		*B
    		for Diversity, w/ Digital Audio Broadcasting

    1. Detach the No. 2 antenna cord sub-assembly from the 4 clamps and the notch on the rear of the roof headlining assembly.

    2. for Diversity:
      Detach the No. 2 antenna cord sub-assembly from the 9 clamps and the 2 notches on the rear of the roof headlining assembly.

    3. for Diversity, w/ Digital Audio Broadcasting:
      Detach the No. 2 antenna cord sub-assembly from the 10 clamps and the 2 notches on the rear of the roof headlining assembly.

    4. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

    5. Remove the double-sided tape from the roof headlining assembly.