Front Seat Assembly (For Walk In Seat Type) Installation


  1. INSTALL FRONT SEAT ASSEMBLY

  2. INSTALL SEAT TRACK COVER RH

  3. INSTALL INNER SEAT TRACK BRACKET COVER RH

  4. INSTALL FRONT SEAT OUTER TRACK BRACKET COVER RH

  5. INSTALL FRONT SEAT INNER TRACK BRACKET COVER RH

  6. INSTALL FRONT SEAT HEADREST ASSEMBLY

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  8. CHECK SRS WARNING LIGHT

  9. INSPECT FRONT SEAT ASSEMBLY

Front Seat Assembly (For Walk In Seat Type) -- Installation


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the RH side.


1. INSTALL FRONT SEAT ASSEMBLY

  1. Place the front seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the seat wire connectors under the seat.

  1. Temporarily install the front seat assembly with the 4 bolts.

  1. Operate the seat track adjusting handle to move the seat to the rearmost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Installation

  1. Tighten the bolts in the order indicated in the illustration.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}

  1. Operate the seat track adjusting handle to move the seat to the foremost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Installation

  1. Tighten the bolts in the order indicated in the illustration.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}


2. INSTALL SEAT TRACK COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Move the cover in the direction of the arrow to attach the 2 guides.

  1. Attach the 2 claws to install the cover.



3. INSTALL INNER SEAT TRACK BRACKET COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Move the cover in the direction of the arrow to attach the 2 guides.

  1. Attach the 2 claws to install the cover.



4. INSTALL FRONT SEAT OUTER TRACK BRACKET COVER RH

  1. Operate the seat track adjusting handle to move the seat to the rearmost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Move the cover in the direction of the arrow to attach the guide.

  1. Attach the 2 claws to install the cover.



5. INSTALL FRONT SEAT INNER TRACK BRACKET COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 2 claws to install the cover.



6. INSTALL FRONT SEAT HEADREST ASSEMBLY


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


8. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (LandCruiser RM000000XFD0N3X.html).



9. INSPECT FRONT SEAT ASSEMBLY

  1. w/ Seat Heater System:
    Check the seat heater operation.

    1. Turn the ignition switch to ON.

    2. Turn the seat heater switch on.

    3. Wait 5 minutes or more and confirm that the seat surface becomes warm.