Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly


  1. REMOVE REAR SEAT UPPER RECLINING COVER RH

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

  3. REMOVE REAR SEAT CUSHION MOULDING RH

  4. REMOVE REAR SEAT REAR CUSHION MOULDING LH

  5. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

  6. REMOVE REAR SEAT INNER BELT ASSEMBLY

  7. REMOVE REAR SEATBACK LOCK STRIKER COVER RH

  8. REMOVE SEAT CUSHION COVER WITH PAD

  9. REMOVE REAR NO. 2 SEAT PROTECTOR

  10. REMOVE REAR SEAT CUSHION EDGE PROTECTOR

  11. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

  12. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

  13. REMOVE RECLINING ADJUSTER KNOB CAP RH

  14. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

  15. REMOVE REAR SEAT COVER CAP

  16. REMOVE REAR CENTER BACK LOCK CONTROL LEVER

  17. REMOVE REAR SEATBACK COVER

  18. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

  19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

  20. REMOVE SEATBACK COVER WITH PAD

  21. REMOVE SEPARATE TYPE REAR SEATBACK COVER

  22. REMOVE REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

  23. REMOVE REAR SEATBACK EDGE PROTECTOR

  24. REMOVE REAR SEAT INNER RECLINING COVER RH

  25. REMOVE RECLINING ADJUSTER INSIDE COVER RH

  26. REMOVE RECLINING ADJUSTER INSIDE COVER RH

  27. REMOVE RECLINING ADJUSTER INSIDE COVER RH

  28. REMOVE REAR SEAT CUSHION SPRING DAMPER

  29. REMOVE REAR SEATBACK SPRING DAMPER (w/ Dynamic Damper)

  30. REMOVE REAR SEAT RECLINING CONTROL CABLE

  31. REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE

  32. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

  33. REMOVE REAR SEAT WIRE RH (w/ Seat Heater System)

  34. REMOVE REAR SEAT CUSHION SET PLATE

  35. REMOVE REAR SEATBACK LOCK PLATE LH

  36. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH

  37. REMOVE REAR SEAT COVER

  38. REMOVE REAR SEAT CUSHION SPRING

  39. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH

  40. REMOVE REAR SEAT TRACK ADJUSTING HANDLE RH

Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) -- Disassembly


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE REAR SEAT UPPER RECLINING COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover RH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws and reclining adjuster release handle RH.



3. REMOVE REAR SEAT CUSHION MOULDING RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the clip.

  1. Using a moulding remover, detach the 3 claws.

  1. Move the rear seat cushion moulding RH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding RH.



4. REMOVE REAR SEAT REAR CUSHION MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw.

  1. Using a moulding remover, detach the 3 claws.

  1. Detach the 2 guides and remove the rear seat rear cushion moulding LH.



5. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Remove the bolt and inner belt.



6. REMOVE REAR SEAT INNER BELT ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and inner belt.



7. REMOVE REAR SEATBACK LOCK STRIKER COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the 3 clips and remove the rear seatback lock striker cover RH.



8. REMOVE SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:

    1. Disconnect the 2 rear seat heater connectors.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Pull out the wire harness as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hooks and remove the seat cushion cover with pad.



9. REMOVE REAR NO. 2 SEAT PROTECTOR


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 rear No. 2 seat protectors from the separate type rear seat cushion pad.



10. REMOVE REAR SEAT CUSHION EDGE PROTECTOR

  1. Remove the rear seat cushion edge protector from the cushion spring.



11. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 14 hog rings and separate type rear seat cushion cover from the separate type rear seat cushion pad.



12. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Cut off the 23 tack pins and remove the rear seat cushion heater assembly from the separate type rear seat cushion cover.

    Text in Illustration
    *1
    		Tack Pin


13. REMOVE RECLINING ADJUSTER KNOB CAP RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Using a screwdriver, detach the claw and guide, and then remove the reclining adjuster knob cap RH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


14. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Disconnect the cable in the order shown in the illustration and remove the rear seat lock control lever sub-assembly RH.



15. REMOVE REAR SEAT COVER CAP


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the claw and guide, and then remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


16. REMOVE REAR CENTER BACK LOCK CONTROL LEVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws.

  1. Move the rear center back lock control lever in the direction of the arrow to detach the guide and remove the rear center back lock control lever.

  1. Detach the cable clamp and disconnect the cable from the rear center back lock control lever.



17. REMOVE REAR SEATBACK COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 4 claws and remove the rear seatback cover.

    HINT:
    Tape the screwdriver tip before use.


18. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the 7 clips and remove the rear seatback board carpet assembly RH.



19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies.



20. REMOVE SEATBACK COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Remove the 14 hog rings and detach the hooks, and then remove the seatback cover with pad.

    Text in Illustration
    *1
    		Hook
    *2
    		Hog Ring


  1. w/ Seat Heater System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the wire harness.



21. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:

    1. Disconnect the rear seatback heater assembly wire harness from the separate type rear seatback pad.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 8 hog rings and separate type rear seatback cover from the separate type rear seatback pad.



22. REMOVE REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Cut off the 11 tack pins which fasten the rear seatback heater assembly to the separate type rear seatback cover, and then remove the rear seatback heater assembly from the separate type rear seatback cover.

    Text in Illustration
    *1
    		Tack Pin


23. REMOVE REAR SEATBACK EDGE PROTECTOR

  1. Remove the rear seatback edge protector from the rear seatback frame sub-assembly RH.



24. REMOVE REAR SEAT INNER RECLINING COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws.

  1. Detach the guide and remove the rear seat inner reclining cover RH.



25. REMOVE RECLINING ADJUSTER INSIDE COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws.

  1. Detach the 2 claws and remove the reclining adjuster inside cover RH.



26. REMOVE RECLINING ADJUSTER INSIDE COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the clip.

  1. Move the reclining adjuster inside cover RH in the direction of the arrow to detach the 2 claws and remove the reclining adjuster inside cover RH.



27. REMOVE RECLINING ADJUSTER INSIDE COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the claw and guide, and remove the reclining adjuster inside cover RH.



28. REMOVE REAR SEAT CUSHION SPRING DAMPER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 nuts and rear seat cushion spring damper.



29. REMOVE REAR SEATBACK SPRING DAMPER (w/ Dynamic Damper)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 nuts and rear seatback spring damper.



30. REMOVE REAR SEAT RECLINING CONTROL CABLE


  1. Cut off the 3 cable ties.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly



  1. Detach the 2 cable clamps and disconnect the rear seat reclining control cable, and then remove the rear seat reclining control cable.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly



31. REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE


  1. Detach the cable clamp and disconnect the rear No. 2 seat reclining control cable, and then remove the rear No. 2 seat reclining control cable.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly



32. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Detach the 2 clamps and remove the seat heater control sub-assembly.



33. REMOVE REAR SEAT WIRE RH (w/ Seat Heater System)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the claw and disconnect the rear seat wire connector.

  1. Detach the clamp and remove the rear seat wire RH.



34. REMOVE REAR SEAT CUSHION SET PLATE


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 nuts and rear seat cushion set plate.



35. REMOVE REAR SEATBACK LOCK PLATE LH

  1. Detach the 2 cable clamps and disconnect the cable.



  1. Remove the nut and rear seatback lock plate LH.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly



36. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and rear seatback frame sub-assembly RH.



37. REMOVE REAR SEAT COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw and rear seat cover.



38. REMOVE REAR SEAT CUSHION SPRING


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 hooks and remove the rear seat cushion spring.



39. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Disassembly

  1. Remove the 6 nuts and rear seat cushion frame sub-assembly RH together with the No. 1 seat leg plate.

    Text in Illustration
    *1
    		No. 1 Seat Leg Plate


40. REMOVE REAR SEAT TRACK ADJUSTING HANDLE RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the seat cushion side frame sub-assembly RH.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Slide the slide rail to the rearmost position.

  1. Using a small screwdriver, push down the handle stopper to detach the claw and remove the rear seat track adjusting handle RH.

    HINT:
    Insert the screwdriver in the hole shown into the illustration while looking into the hole.