Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation


  1. INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

  2. INSTALL REAR SEAT SHOULDER BELT GUIDE

  3. INSTALL SEATBACK COVER WITH PAD

  4. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

  5. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH

  6. INSTALL REAR SEATBACK COVER

  7. INSTALL REAR SEAT SHOULDER BELT COVER

  8. INSTALL SEAT BELT ANCHOR COVER CAP

  9. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

  10. INSTALL RECLINING ADJUSTER KNOB CAP LH

  11. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

  12. INSTALL CENTER SEATBACK ASSEMBLY

  13. INSTALL SEAT CUSHION COVER WITH PAD

  14. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

  15. INSTALL REAR SEAT CUSHION MOULDING LH

  16. INSTALL CENTER SEAT HINGE COVER RH

  17. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

  18. INSTALL REAR SEAT UPPER RECLINING COVER LH

  19. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) -- Installation


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).


1. INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation
NOTICE:
When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.

  1. Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the nut and bolt as shown in the illustration.

    HINT:
    First install the bolt, and then install the nut.
    Torque:
    for bolt:
    7.5 N*m{76 kgf*cm, 66 in.*lbf}
    for nut:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    Text in Illustration
    *1
    		Bolt
    *2
    		Nut


2. INSTALL REAR SEAT SHOULDER BELT GUIDE

  1. Attach the guide and claw to install the rear seat shoulder belt guide.



3. INSTALL SEATBACK COVER WITH PAD


  1. w/ Seat Heater System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation

    1. Install the wire harness as shown in the illustration.

      Text in Illustration
      *a
      		Paint Mark


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Connect the outer belt to the seatback cover with pad.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation

  1. Attach the hooks.

    Text in Illustration
    *1
    		Hog Ring Pliers
    *2
    		Hook
    *3
    		Hog Ring

  1. Using hog ring pliers, install the seatback cover with pad with 10 new hog rings.

    NOTICE:
    1. Be careful not to damage the separate type rear seatback cover.
    2. Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.


4. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

  1. Attach the 4 claws to install the 2 rear No. 1 seat headrest support assemblies.



5. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH

  1. Attach the 7 clips to install the rear seatback board carpet assembly LH.



6. INSTALL REAR SEATBACK COVER

  1. Attach the 4 claws to install the rear seatback cover.



7. INSTALL REAR SEAT SHOULDER BELT COVER

  1. Connect the outer belt to the rear seat shoulder belt cover.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 2 guides and 2 claws to install the rear seat shoulder belt cover.



8. INSTALL SEAT BELT ANCHOR COVER CAP


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 2 claws to install the seat belt anchor cover cap.



9. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 2 claws to install the seat belt anchor cover cap.



10. INSTALL RECLINING ADJUSTER KNOB CAP LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the guide and claw to install the reclining adjuster knob cap LH.



11. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation

  1. Install the inner belt and connect the 3 point type belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    NOTICE:
    Do not allow the anchor part of the anchor plate sub-assembly to overlap the protruding parts of the seatback frame.
    Text in Illustration
    *a
    		Protruding Part


12. INSTALL CENTER SEATBACK ASSEMBLY

  1. Install the center seatback assembly with the 2 bolts.

    Torque:
    21 N*m{214 kgf*cm, 15 ft.*lbf}


13. INSTALL SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the hook.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the hooks to install the seat cushion cover with pad.



  1. w/ Seat Heater System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Pass the wire harness as shown in the illustration.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Connect the 2 rear seat heater connectors.



14. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

  1. Attach the 3 clips to install the rear seatback lock striker cover LH.



15. INSTALL REAR SEAT CUSHION MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Move the rear seat cushion moulding LH in the direction of the arrow to attach the guide.

  1. Attach the 3 claws and clip to install the rear seat cushion moulding LH.



16. INSTALL CENTER SEAT HINGE COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 2 guides and install the center seat hinge cover LH with the clip.



17. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

  1. Install the reclining adjuster release handle LH with the 3 screws.



18. INSTALL REAR SEAT UPPER RECLINING COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 3 claws to install the rear seat upper reclining cover LH.



19. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

  1. Install the rear No. 1 seat assembly LH (LandCruiser RM00000468800TX.html).